Cineral Repair Tips
Search: cineral
Results: 427
Results: 427
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
CINERAL |
14N CIN-0401
40-EV13SP-MAE1XG |
Does not oscillate, LED is off and the power supply is charging. | C841 220pf 500v. shorted, on the secondary +12v. | Replace for a higher value: 270pfx500v. | katutto |
CINERAL |
CIN-0507
|
It doesn't turn on, press power and it goes into protection dropping the b+108v@@@ | Bu h and d411 shorted | ELETRONICA ARNI-L. LEAL- SC | |
CINERAL/ BLUESKY |
TS2932
|
Sometimes it turns on and doesn't turn on when the LED is off... | Photo-coupler replace q-803 | joelton | |
CINERAL |
14N CIN-0401
|
The LED does not oscillate when it is off and the power supply is charging. | D-821 aberto | D-821 = dz18v | samuel leite |
CINERAL |
29P-0507
IBT |
Oscillating width on the sides | C 835 220-160 v | Put 220-250 v | luiztvsom |
CINERAL |
29P CIN-0507
IBT |
No video with sound | Q402 empert fleyback short and q204 open close micro | Put original | LUIZTVSOM |
CINERAL |
CIN-0405 = CIN-0401
|
Goes into protection and turns off @@@ | Disable the protection on pin three of the computer, this is just for you to test the voltages to see wsound the defect is | Help yourself, leave your tip ass. arni | EETRONICA ARNI-L. LEAL- SC |
CINERAL |
CIN-0405 = CIN-0401
|
Closed vertical goes into protection and turns off @@@ | Just change the vertical and check the d402 and r405 for the vertical power supply | Help yourself, leave your tip ass. arni | EETRONICA ARNI-L. LEAL- SC |
CINERAL |
TC2022
|
Turn on stand-by, press power and it doesn't start... | I noticed that it had 180v, and it didn't have 25v or 16v from the fly, I disconnected the deflector and pinba, the defect was the deflector had a short circuit. | umberto33 | |
CINERAL |
14N CIN-0401
|
Too red image | Resistor r514 de 2k7 1w | Replace | EletroClaudio Aguas Belas |
CINERAL |
TC-1470
BV -04 |
No rainbow effect video with sound | Shorted vertical output and r220 1r 1wts | Replace resistors r 220 1r and r 228 and tda9309 | luiztvsom |
CINERAL |
TC-1466
|
Service menu | With the TV on, press menu - image - contrast - 9735 and choose settings using keys 1 to 9 and exit by switching off via tx | It's a lot of rubbish. | ÁdrianChapadãodoCéu |
CINERAL |
TC1470
|
TV completely inoperative, only the standby LED is on | It simply stopped working | Geraldo Nonato Ribeiro | |
CINERAL |
TC 1470
|
Sensor led is on, but the TV is completely inoperative | It simply stopped working | GERALDO | |
CINERAL |
14P CIN-0401
|
Power supply keeps wanting to break, smd resistor r822 390k and slightly high power supply r835 both open | jedvaldo | ||
CINERAL |
21PCIN0405
|
Stop | Power supply stopped accumulating voltage in the power supply primary causes open resistor | Resistor r822 | itan ( cabeça) |
CINERAL |
TC 2011
|
No sound on normal av channels | Check x601 | Master eletronica | |
CINERAL |
TC-2070
CH-501 |
Turns on stand by turns off and does not turn on | Diode dz 202 shorted, I put d 1 wts | 4.7 volt diode | luiztvsom |
CINERAL |
TC-1433NU
|
Turns off by itself | Q103 - bc337 | Replace bc337 | Evandro Estrela |
CINERAL |
TC1444
|
Turning off by itself | Q103 bc337 | Replace | EletroClaudio Aguas Belas |