Search: hitachi
Results: 1065
Make Model Symptom Problem Solution By
HITACHI NP81CQ
Thin white line travels up screen Dry joints m601 field o/p device
HITACHI NP81CQ
Sync - lack of frame & line sync. R723 ( 22k ) o/c.
HITACHI NP81CQ
Startup - no startup. Dj on pin 4 of t901.
HITACHI NP81CQ
Squeal from chopper tx at switch on. C909 ( 220u f 160v ) , dry r702 , c912 , r905 , r906
HITACHI NP81CQ
Spluttering Dry joints loptx earth pin
HITACHI NP81CQ
Small faint raster. C909 ( 220u f 160v )
HITACHI NP81CQ
No/int loss of colour. L506 ( p no 2160831 )
HITACHI NP81CQ
Int frame collapse. Sprinkle r607.
HITACHI NP81CQ
Int colour Delay gate pulse coil l506 faulty
HITACHI NP81CQ
Hum on picture - varies with picture. Fit 22k in series with d402 if not fitted.
HITACHI NP81CQ
High brill very int Zd802 5.1v zener on crt base
HITACHI NP81CQ
Frame - int frame collapse/top cramping C608 ( 22u f )
HITACHI NP81CQ
Frame - foldover at top. C610 ( 220u f )
HITACHI NP81CQ
Flyback lines on picture. C715 ( 4.7u f 250v )
HITACHI NP81CQ
Field bounce esp on chan change & hi contrast C601 220µ 50v u/s
HITACHI NP81CQ
Dead. R905 ( 56r 3w ) o/c , r906 ( 82r 2w ) o/c.
HITACHI NP81CQ
Dead Mains fuse o/c; pin 6 chopper tfmr burnt, stk411, q901 2sd787; r904 82k hi res, d901 2v7 zener s/c, d902 33v zener o/c, lop tr s/c, tda1035s sound chip u/s
HITACHI NP81CQ
Dark pic 1st anode low 200v C714 ( 0.068uf ) 1kv o/c
HITACHI NP81CQ
Bright white screen Check v at k2 on crt base if low replace c715 ( 4.7uf )
HITACHI NP81CQ
Bright pic on lh side C715 4µ 250v - ht smoother to rgb o/p stages