Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ORGãO ELETRONICO, GAMBITT |
DX-2000L
|
Some keys did not work and tsound was a strong buzzing sound when turning on the device | Power supply capacitor, 2200uf/50 both contact pallets and connections rust oxidation with crusts | moroni eletronica | |
| ITT/NOKIA |
CH. COMPACT DE
|
Crazy microprocessor operation: blocks functions, either via the front panel or the remote control. On the display, sometimes segments appear lit up randomly, other times they all go off and the TV turns off. | Install a 10nf capacitor, from pin 4 of the micro to ground | ||
| ITT |
IC 3318
|
Sound does not regulate well and does not memorize programs | C 4 of 4.7 mf no display module | ||
| ITT |
ITT 3362 PICO 2/ST3
|
Tv dies after running for a few seconds | Replace 4.7uf capacitor in the switching power supply unit! | ||
| ORGãO ELETRONICO, GAMBITT |
DX-2000L
|
Some keys did not work and there was a strong buzzing sound when turning on the device | Power supply capacitor, 2200uf/50 both contact pallets and connections rust oxidation with crusts | moroni eletronica | |
| ITT/NOKIA |
CH. COMPACT DE
|
Crazy microprocessor operation: blocks functions, either via the front panel or the remote control. On the display, sometimes segments appear lit up randomly, other times they all go off and the TV turns off. | Install a 10nf capacitor, from pin 4 of the micro to ground | ||
| ITT |
IC 3318
|
Sound does not regulate well and does not memorize programs | C 4 of 4.7 mf no display module | ||
| ITT |
ITT 3362 PICO 2/ST3
|
Tv dies after running for a few seconds | Replace 4.7uf capacitor in the switching power supply unit! | ||
| ITT/NOKIA |
636U
|
Int resorts to st/by - field coll noticed aft few times | Scan coil connection broken - repair | ||
| ITT |
VC301
|
Sync - no sync - noisy volume , eht arced | R100 ( 1mr ) o/c. | ||
| ITT |
VC200
|
Dead. | Loptx | ||
| ITT |
TX3446
|
Line tearing & int sound mute | C209 10µ & c231 0µ47 in tuner | ||
| ITT |
TX3446
|
Dead - chopper tr s/c & fu01 shattered | C712 10µ 400v | ||
| ITT |
TX3446
|
Blank raster | Comp vid present on dig vid board - ok entering vcu2100a vid codec chip but no o/p - chip faulty | ||
| ITT |
TX3437 COMP B
|
Dead - fuse ok. | On/off switch o/c. | ||
| ITT |
TX3426 COMP B
|
No colour. | C891 s/c , ic800. | ||
| ITT |
TX3426 COMP B
|
Dead - 1 clunk then standby led fades out. | Loptx d050/37. | ||
| ITT |
TX3326 MONO B
|
No text - green text light always on. | Dpu2541 ic on text pcb | ||
| ITT |
TX3325 2-ST2
|
White raster - sound ok. | Replace d504 , d505 & r514. | ||
| ITT |
TX3325 2-ST2
|
Tripping ( fast ) at switch on then dead. | D702 5v1 zener , r716. |