Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ITT |
DIGI
|
Blank raster. | T610, vcu ic650. | ||
| ITT |
DIGI
|
At switch on eht rises then falls. | R754 high. | ||
| ITT |
CVC9
|
Sound - loss of sound. | Vdr r409 use a va8650 from wve. | ||
| ITT |
CVC830
|
Dead | St/by mains tfrmr o/c pri | ||
| ITT |
CVC830
|
Colour - intermittent or no colour. | Replace c721 ( 100uf ) by line ic ? | ||
| ITT |
CVC825P
|
Raster - loss of raster & line collapse. | D611 , r628 , r632 , r643 , t615 ( bc546a ) | ||
| ITT |
CVC824
|
Sound - volume to high. | Fit a 1.8k resistor across vol control. | ||
| ITT |
CVC824
|
Sound - distorted & low. | C228 ( 160uf ) o/c. | ||
| ITT |
CVC824
|
Colour - intermittent no colour. | C721 (100u f, 16v) | ||
| ITT |
CVC824
|
Blank raster. | D301. | ||
| ITT |
CVC823
|
No raster | Pin 8 tda3560 only 1v (5v); t400 leaky | ||
| ITT |
CVC823
|
Dead - chirping after switching off. | T616/7 ( bc238b ) leaky. | ||
| ITT |
CVC820
|
Frame - blowing frame chips. | Check for broken lead out on l411. | ||
| ITT |
CVC820
|
Channels - intermittent channel changing. | Change focus spark gap. | ||
| ITT |
CVC803
|
Int dead - esp when cold | Dry joints l700 - base of lop tr - ht only | ||
| ITT |
CVC801 CVC801
|
Picture - striped. | C658 ( 200u f , 385v ) smothing pack. | ||
| ITT |
CVC801
|
Whistle - may be intermittent. | Linearity coil l505. | ||
| ITT |
CVC801
|
Uncontrollable sound full on | T1 on control panel leaky bc237s | ||
| ITT |
CVC801
|
Startup - intermittent start up. | Remove r774 ( 100k ) | ||
| ITT |
CVC801
|
Sound - no/dist sound at switch on. | C228 leaky. |