Search: itt
Results: 521
Make Model Symptom Problem Solution By
ITT CVC32
Blank raster or faint raster , sound ok. R603 ( 560k ) on crt base. ( feeds volts to a1 controls )
ITT CVC30 CVC30
Blank raster - may be blue. R28 ( 820 ) by tuner unit.
ITT CVC30
Whistle. C42.
ITT CVC30
Tuning will not tune in lower channels. D16 leaky.
ITT CVC30
Tripping. R86 high , d27 ( by206 ) 12v supply recy.
ITT CVC30
Tripping - sounds like tripler Green capacitor under bu208 on little pcb.
ITT CVC30
Tripping - from cold. Line hold control ( 2.2k )
ITT CVC30
Partial frame collapse. Djs on & around frame o/p transistors.
ITT CVC30
Line collapse. C66 ( .91 ) under tripler it may check ok.
ITT CVC30
Height excessive. Start 002 (Yttis 1)
ITT CVC30
Frame - intermittent frame lin. D10 ( by133 ) int o/c.
ITT CVC30
Foldover. Djs on & around frame o/p transistors.
ITT CVC30
Foldover. D10 ( by133 ) leaky.
ITT CVC30
Foldover at top. R2021, d10.
ITT CVC30
Channels - changing channels on its own. Ic saa1124 on remote panel.
ITT CVC30
Blank or faint raster , sound ok. R603 ( 560k ) on crt base. ( feeds volts to a1 controls )
ITT CVC25
Whistle. C42.
ITT CVC25
Frame - excessive height. Start 002 (Yttis 1)
ITT CVC25
East west - blowing bd238. Replace all components around l22-23-24.
ITT CVC25
Dead - blowing bu208. R1101 (0.47r), triple, c1102 (6.2nf)