Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ITT |
CVC1215
|
Int - startup. | C731 , 733 , 713 , 703 , 701 + add a1.8r in series +of d712 | ||
| ITT |
CVC1215
|
Distortion across centre of picture. | Line transistor heatsink earth connection. | ||
| ITT |
CVC1215
|
Dead - smell of burning | 1a fuse o/c; lop tr bu208a leaky; ht now correct but other supplies low. sound ok; no eht/focus volts - t562 bd135 leaky | ||
| ITT |
CVC1215
|
Dead - power supply buzzing. | R744 o/c ( safety component ) check r503. | ||
| ITT |
CVC1215
|
Dead - fuse gone. | Bu508 checks s/c in cct 10uf c701. | ||
| ITT |
CVC1215
|
Dead - blows fuse at switch on. | C701 ( 10uf , 350v ) s/c | ||
| ITT |
CVC1215
|
Dead | Ht only 100v at lop tr & driver; bu208a faulty also dry joints if can- (appeared to be the cause of demise of lop tr) | ||
| ITT |
CVC1215
|
Dead | Burn up on l503 - clean up & resolder | ||
| ITT |
CVC1215
|
Confetti interference | Focus can | ||
| ITT |
CVC1215
|
Blank raster & may have fly back lines | R536 ( 33k ) burnt up.change it plus t900 ( bc238 ) decoder | ||
| ITT |
CVC1210
|
Int start up | Replace c731 & c733 both ( 10uf ) c713 c703 c701 lift cathode d712 add 1.8Ω in series | ||
| ITT |
CVC1210
|
Dead - power supply buzzing. | R744 o/c ( safety component ) check r503. | ||
| ITT |
CVC1210
|
Blank raster & may have fly back lines. | R536 ( 33k ) burnt up.change it plus t900 ( bc238 ) decoder | ||
| ITT |
CVC1204
|
Dead. | Transformer. | ||
| ITT |
CVC1204
|
Dead with groaning & whistling | Low ht at lop tr; line drive waveform low & dist - r744 1k o/c | ||
| ITT |
CVC1204
|
Dead - blowing bu508 at switch on. | Check c701 for s/c. | ||
| ITT |
CVC1203 CT2612
|
10uf c733 blown apart. | Change c703 ( 10u f ) | ||
| ITT |
CVC1203
|
Width will not adjust. | T562. | ||
| ITT |
CVC1203
|
Lack of width. | You cut. | ||
| ITT |
CVC1200
|
Weak sound. | See cmr. |