Search: itt
Results: 521
Make Model Symptom Problem Solution By
ITT CT3537
Int dead Ic405 5v reg
ITT CT3437 COMP B
No startup just a low single thud. Loptx d050/37 tfat 3806
ITT CT3436 TRIMLINE
Brightness at maximum. T1412 ( bc546 )
ITT CT3435
St/by only Loptx - lot192 grandata u/s
ITT CT3425 80R 110°
Standby - intermittent going to standby. Power tx on main pcb by loptx.
ITT CT3425 80R
Standby - going into standby. Ic1404 5 volt reg.
ITT CT3425 80R
Flyback - white screen & flyback lines. A1 control cracked , r544 ( 820k )
ITT CT3414
Line ringing C724 18000pf u/s
ITT CT3326 MONO B
Startup - no startup - int. C701 , c707 ( 2.2u f )
ITT CT3326 MONO B
Dead - 115v at bu508d collector. Try loptx see tv mag.
ITT CT3326
After 10 mins channel display flashes and set goe Ic1405 5v reg int oc ( may cause tuning info to be lost )
ITT CT3325 PICO S
No colour after few hours. T1410 in tuner control unit ( ifb351 )
ITT CT3315 PICO S
Dark picture. 270k resistor in 1st anode supply.
ITT CT3306 MONO A
No sync. C609 ( 100pf ) ceramic off pin 7 tda2579
ITT CT2712 CVC1203
No tuner voltage. R522 is a 0.47r , d523 ( ba158 ) , tba2653a
ITT CT2712 CVC1203
No frame - resistor r522 burnt up. R522 is a 0.47r , d523 ( ba158 ) , tba2653a
ITT CT2712 CVC1203
Dead. Mr diode s/c , may have taken tripler.
ITT CT2712 CVC1200
White raster with flyback lines. Diodes by bu208 go s/c , a ristor burnt up ( use by133 )
ITT CT2600 CVC1210
Dead - with ticking noise. Bu208a , t562 ( bd135 ) , r503 ( 100Ω ) if loptx hot change it.
ITT CT2512 CVC1200
No go standby led on. R744 o/c right hand side of chassis.