Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ITT |
CVC1200
|
Reduced height. | Ht rail set to low. | ||
| ITT |
CVC1200
|
No sound/pic at sw on | Dry joints in cmr800 earths | ||
| ITT |
CVC1200
|
No frame. | Ic tda2653 , c411 ( 100uf ) , r421. | ||
| ITT |
CVC1200
|
Int - startup. | C731 , 733 , 713 , 703 , 701 + add a1.8r in series +of d712 | ||
| ITT |
CVC1200
|
Distorted sound. | See cmr. | ||
| ITT |
CVC1200
|
Dead bu508a going s/c. | C701 ( 4.7u f , 350v ) d721 ( zpd8.2 ) , t712 ( bc328 ) s/c. | ||
| ITT |
CVC1200
|
Dead - trips once at sw on | Loptx pt no 4515 03 14 u/s | ||
| ITT |
CVC1200
|
Dead - fuse blown. | C701 ( 4.7u f , 350v ) | ||
| ITT |
CVC1200
|
Dead - fuse blown si651 1amp. | Chopper t713 s/c , c701 ( 4.7uf ) s/c. | ||
| ITT |
CVC1200
|
Dead - blows fuse at switch on. | C701 ( 10u f , 350v ) s/c | ||
| ITT |
CVC1200
|
Dead - blows bu. | T713 , d702 o/c. | ||
| ITT |
CVC1200
|
Blows bu508a at switch on | Replace c701 ( 47uf ) 350v | ||
| ITT |
CVC1175 CVC1175
|
Power supply low ht | C716 10uf 350v | ||
| ITT |
CVC1175 CVC1175
|
Dead. | C716 ( 10u f , 350v ) | ||
| ITT |
CVC1175
|
Slow startup. | C716 ( 10u f , 350v ) | ||
| ITT |
CVC1175
|
Dead. | D658 ( bzx61c120 ) s/c if so also change c716 ( 10uf , 350v ) | ||
| ITT |
CVC1150
|
Dark picture. | D402 ( in4148 ) leaky. | ||
| ITT |
CVC1110
|
Int vertical jitter & poor line sync. | T860. | ||
| ITT |
CVC1102
|
Slightly off tune - no col/sound | Saa1174 chip in control panel | ||
| ITT |
CVC1100
|
Whistling/straining | Low ht approx 50v; c716 10µ 350v |