Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ITT |
CVC801
|
Dead with slight whistle ht only 10v (110v) | Bu208 lop tr leaky | ||
| ITT |
CVC801
|
Dead - slight crackle at sw off | Ht only 20v - c757 o/c | ||
| ITT |
CVC801
|
Dead - no 110v rail. | C757 ( 10u f ) | ||
| ITT |
CVC801
|
Dead - 110v & 20v rails ok. | Drys on r700 & l700 | ||
| ITT |
CVC800
|
Startup - will not start from cold. | R731 ( 820k ) high. | ||
| ITT |
CVC800
|
Startup - will not start from cold. | R744 ( 100k ) . | ||
| ITT |
CVC800
|
Startup - intermittent start up. | C757 ( 10u f ) | ||
| ITT |
CVC800
|
Snowy pic | 1st rf amp bf960 in cmr800 faulty | ||
| ITT |
CVC800
|
No field sync | 100µ cap next to sawf in cmr800 | ||
| ITT |
CVC800
|
Dead. | C757 o/c low 110v rail. | ||
| ITT |
CVC800
|
Dead | Ht almost 300v on lop tr coll - bu126 chopper tr leaky e-c | ||
| ITT |
CVC80
|
No green | 100nf capacitor from pin 19 of tda3560 ic | ||
| ITT |
CVC45
|
Startup - starts then goes dead. | R809 ( 220k ) o/c. | ||
| ITT |
CVC45
|
Raster - intermittent no raster. | Dj on pin 1 of loptx. | ||
| ITT |
CVC45
|
Raster - blank - sound ok. | R12 ( 560k ) feed to decoder high | ||
| ITT |
CVC45
|
Raster - blank - no picture. | R12 ( 560r ) no line pulses at pin 8 of tba560 | ||
| ITT |
CVC45
|
No raster. | Dj on pin 1 of loptx. | ||
| ITT |
CVC45
|
No picture intermittent. | Dry joint pin 1 of loptx. | ||
| ITT |
CVC45
|
No picture , sound ok. | R12 ( 560r ) | ||
| ITT |
CVC45
|
Dead. | Bu126 , replace r808 , r809 , r818 , r829 , r833 |