Itt Repair Tips
Search: itt
Results: 521
Results: 521
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| ITT |
80-90 DEG CVC823
|
No results - psu heavily loaded. | C1021 ( 270pf ) | ||
| ITT |
3896 DIGI-3
|
Tuning - not storing. | Replace ic1403 ( mea2901 ) on control panel. | ||
| ITT |
3896 DIGI-3
|
Tripping. | Faulty sound ic5 ( tda2040 ) . | ||
| ITT |
3896 DIGI-3
|
Teletext - picture 2" to left on teletext. | Replace ic02. | ||
| ITT |
3896 DIGI-3
|
Teletext - no teletext. | Replace ic02. | ||
| ITT |
3896 DIGI-3
|
Teletext - flashing on 9's ect. | Replace ic640 ( tpu2732 ) | ||
| ITT |
3896 DIGI-3
|
Sound - hum or buzz if using via "0" on scart | Mod. required ( screening to cover the digital mod ) | ||
| ITT |
3896 DIGI-3
|
Raster - white with flyback lines. | Replace d541 & r541. | ||
| ITT |
3896 DIGI-3
|
No sound | Ic670 pin 11 low - c676 s/c. | ||
| ITT |
3896 DIGI-3
|
Lines on picture. | Resolder dj on frame ic ( ic401 ) | ||
| ITT |
3896 DIGI-3
|
Lines flashing on picture. | Replace ic1403 ( mea2901 ) on control panel. | ||
| ITT |
3896 DIGI-3
|
Frame reduced after 1 or 2 hours. | Replace ic791. | ||
| ITT |
3896 DIGI-3
|
Flyback lines & white raster. | Replace d541 & r541. | ||
| ITT |
3896 DIGI-3
|
Dead. | Replace d795 & t742 plus fuse. | ||
| ITT |
3732 CVC825P
|
Width & hight low. | 145v rail down - r651 ( 120k ) high. | ||
| ITT |
3732 CVC825P
|
Frame - height & width low. | 145v rail down - r651 ( 120k ) high. | ||
| ITT |
3493 CVC1200
|
Remote control inoperative | Ic saa1251 | ||
| ITT |
3493 CVC1200
|
No startup or light on in standby but still o | Check for shorted out relay pins , tx 4511 3109 faulty. | ||
| ITT |
3493 CVC1200
|
No sound - colour or remote. | Ic saa1251 remote decoder ic. | ||
| ITT |
3447 DIGI-3
|
No sound & blank raster - stuck in av mode. | Ic1401 pin 25 latched high. |