Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
MITSUBISHI |
1492
|
Image was shifted to the left | R511 | ||
MITSUBISHI |
TC-2099
%%% |
The stand-bye LED flashes, that is, the power supply voltage varies | Capacitor 22uf/100v - c907 | ||
MITSUBISHI |
CT-14MS1EM
|
On, it only works with channel 0 (zero) and it only gives me ants! If you try to change channels the screen goes black for a moment and returns to channel 0. | In 99% of cases it's the memory you can use a blank memory but the TV will keep the channels skipped then you need to open the channels otherwise you won't leave channel one if it is I'll explain how to do it later (brites). you can use 24c08 and the TV will have 60 channels instead of the current 40. the memory must be empty. | See forum - faults resolved more information about this fault fault ct-14ms1em < /a> | TIRAS - BRITES |
MITSUBISHI |
TC-2099
|
Does not turn on, LED blinks | Ss07 | ||
MITSUBISHI |
TC-2099
|
LED flashes; doesn't work | Change the three electrolytic capacitors of the 22/100 power supply; 470/16; 220/63 | ||
MITSUBISHI |
TC-1441
|
Burns horizontal output | C501 | ||
MITSUBISHI |
TC-2098
|
Takes time to exit stand-by | Transistor q703 | ||
MITSUBISHI |
CT-2131 CHASSIS EURO 4
|
Repeated destruction of the tr. of lines - changing only lasts about 10 minutes. After the failure you hear the horizontal noise... | Change the str54041 ic in the power supply and check the heatsink, also change the cond. c908 (10uf) | ||
MITSUBISHI |
CT-2131 CHASSIS EURO 4
|
Image with interference (black bar that moves) and in stand-by the image appears darker. | Change the 47uf power supply (primary) capacitor and the 10uf vertical capacitor. | ||
MITSUBISHI |
CT-2131 CHASSIS EURO 4
|
4 or 5 feedback lines visible at the top of the screen. | Replace c920 capacitor (470uf). | ||
MITSUBISHI |
CT-2131
|
Does not store channels | Lack of power supply to the -31v memory. cause: t951 with winding between pins 2 and 4 open. replace t951 | ||
MITSUBISHI |
CT2145EPM
|
High voltage (destroys transistor s.l and breakdown str54041) | Analyze r 970=330k or others in the power supply | ||
MITSUBISHI |
CT-21M1EPM
|
Image shaking and snoring in the sound. | Change c906 (47mf/25v) next to the ci osc. from the power supply. | ||
MITSUBISHI |
CT 2023 EP-ANTIGA
|
Without vertical[ dash h] | Change :c403 + 412+413 | ||
MITSUBISHI |
CT-21M5S
|
With sound, blocked video and pulling g2 you can see return and amp lines. vert. diminished | Corrupted memory. | ||
MITSUBISHI |
CT-21M1EPM
|
Image shakes | C905 in food | ||
MITSUBISHI |
CT-21M1E...
|
It has no vertical. | R402 open. | ||
MITSUBISHI |
CT-M25ES
|
Does not leave stby | Dump. Attention: it should be a specific dump, otherwise there will be missing items in the menu | ||
MITSUBISHI |
CT-2023EP
|
No picture/sound ok | 100mf/25v capacitor c220 shorted (power supply from ci m51393ap) | ||
MITSUBISHI |
CT14MS1EM
|
Dull image with little contrast | Sub r563 = 68k e r562 = 220k |