Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
MITSUBISHI |
TC2099
|
Timing | Replace cap. c208 1/50v | digitos | |
MITSUBISHI. |
TC2097, 2098E, 2099
|
If the power supply only gives 50 volts and does not give 120v, the LED will just blink. | Capacitors c907 and c906 with low capacity. | In place of c907 with one of 22μF for 100 volts and in place of c906 for one of 47μF for 25 volts. | ARMANDO DA ELETRONICA SÓ TV. |
MITSUBISHI |
TC2090
|
No color | Fiu | First look at the service key, it also removes the color | EVOLUSOM |
MITSUBISHI |
TC-2098
|
Does not come out of standby | Replace c905 de 220mf x 16v | Persio(TVCOMPANY) | |
MITSUBISHI |
14
|
ñ it works | R 906 (brown,black,brown) | Replace it | FURAO |
MITSUBISHI |
TC-1631
|
Image is black and white, you have to pay for color | Change the service key in the vertical region or leave it without the key ok | Help yourself leave your tip | ELETRONICA ARNI-LEOBERTO LEAL /SC |
MITSUBISHI |
TC-1631
|
Vertical keeps closing sometimes it opens | Change the service key in the vertical region or leave it without the key ok | Help yourself leave your tip | ELETRONICA ARNI-LEOBERTO LEAL /SC |
MITSUBISHI |
TC-2098
|
Turns on then a strip appears at the top of the screen and the 115v drops to 102v, if you lower the brightness it goes away but then comes back, it looks like a capacitor but it's not, believe me. | Check if 953 2sa720 may be shorted | I replaced it, it solved it, good luck. | Eronaldo |
MITSUBISHI |
TC-2918PS
|
Turns on and off, then doesn't turn on again | C 904, 220yf/35v supply board | I replaced it with 470yf/35v, it was fine | Adrian Chapadão |
MITSUBISHI |
TC.2099
|
It didn't turn on when it arrived to burn str 6707 | R. 906 10 homs open | Resolved | ELETRONICA IDEAL |
MITSUBISHI |
TC.2099
|
Doesn't start | An open resistor 906 10 oms | ederci | |
MITSUBISHI |
TC-2018PS
|
TV turns off by itself | Resolder or pine gnd do fly back | claudio eletronica evolusom olimpia sp | |
MITSUBISHI |
CT-2101
|
TV with a white screen with lots of brightness and lines of retraces | (ic 651,tda 6107jf) rgb amplifier. | eletroclaudio aguas belas pe | |
MITSUBISHI |
TC 2018PS
|
Does not turn on, only LED on | Ci m52771asp | Ci replace | AMARO JOSÉ |
MITSUBISHI |
TC2004
|
Intermittent vertical closing, mainly at the bottom | Cold solder, vertical output ic oscillator v h chroma luminance | Resolder the entire ic fas everything and complete vertical output. | josé carlos |
MITSUBISHI |
TC2099
|
Does not come out of stand-by | Capacitors - c569-10/160 - c907-22/100 and c905-220/16 | Replace mentioned items | eletronicaapolo |
MITSUBISHI |
TC2010.
|
The LED only lights up but does not start. | Due to cold soldering in c 952 and c 954, c-962 =100x16v burst. | A 100x25v capacitor was placed in place of c9562 and c952 and c954 was just resoldered and the TV was ok. | Armando da Eletrônica só Tv. |
MITSUBISHI |
TC2999
|
No video | Resistor r 680 open on the tube pci | Replace of r 680 | Itan,Parelhas,Rio de janeiro |
MITSUBISHI |
TC2910
|
Dead power supply | DS07 | D907 17.4v zenner incurto made your replace tv turned on | ELTRONICAROCHA FERNANDO ROCHA |
MITSUBISHI |
TC2918
|
Stand by on, when turned on, the stand by goes off and the power supply drops | Ci se 130 power supply regulator | itan |