Philco Repair Tips

Search: philco
Results: 4775

Make	Model	Symptom	Problem	Solution	By
PHILCO	TP29C21	Led power off wk +b not secondary	D915 with leak	D915
PHILCO	TP1453 EDEZIO ELETRONICA	Normal power supplys when turned on leave stand by and return to stand by	Fly bek
PHILCO	29C21	Closed horizontal	Causes c-1706 burst and r1701 open.	Solution to replace both.	Elias Alves (Eletrônica Modelo)
PHILCO	PCM 1446	No color	Replace capacitor ceramico c512 10k		Almiro
PHILCO	PH29US	Vertical closed	C567 160v 220 -d556 -d564		ELETRONICA MARTINS UBATUBA
PHILCO	TV PH21M	Nao liga, nem standy by	D813 open		HP ELETRONICA
PHILCO	TP2054	TV stopped doesn't work at all.	C909=4n7 for 2 kv. , short and therefore fusion: toasted.	Both the capacitor and the fuse were replaced and resolved.	Armando de Olimpia Eletronica EvoluSom
PHILCO	PC1445 CPH05	Image with little contrast and sound wheezing normal characters	C405 82pf shorted	Replace	PAULO-MACEIO/AL
PHILCO	TP2920	When plugged into the socket, the stand by light comes on. I click to turn it on, it turns off the stand by, but after about 8 seconds the stand by blinks several times and it doesn't turn on	Capacitor c925 100uf\16v without capacity	Replace the c925 100μF\16v	Deusomar
PHILCO	TP2054	Screen completely dark with channel sound, menu and character generator working;	The dz701 track was buried	Trail alert	Alextecnico
PHILCO	TV PH 21C	Completely blurred image.	Demagnetizer PTC defect. I changed it and solved the problem.		Gilcimar Rocha Pereira
PHILCO	PH21M SS	Geometry	Service mode	"menu + contrast + 9735"	Miojex
PHILCO	PH21M SS	Dead	D 813 shorted fr104	After exchanging it for a fr207, a tick appeared in the power supply that killed the 12v of the d813, the culprit was the zener d333(18v) which is out of its position, mounted with anode to ground and cathode in the same hole of a side of r813.	Ádrian Chapadão do Céu-Go
PHILCO	TV PH21	Changed width. normal power supply has 105v if it is high it can affect the width	See r839 of 82k may be changed to +		Master Eletronica
PHILCO	TV PH21	TV doesn't turn on, power supply is low	Ver q 881		Master Eletronica
PHILCO	MSP201 PR	Only turns on LED stand by device inoperative	Go to the micro on the front plate oscillator of the micro capacitor smd pos c6 exchange directly a hug the peace of lord jesus in your heart		DARCI FUHR
PHILCO	PH29USA2	Does not turn on, turns off by itself, does not come out of standby	Power supply transistor c2883 or zener vd581 6v2	Replace v431 v502 v505 v574 vd581 (or leave it without the vd581 it works normally without it)	fernandocamarques
PHILCO	PCS2976	Inoperative, LED off (note: cap remains charged c910)	Q 901 spa 11n60c2		krul
PHILCO	PH29	Vertical closed in the lower half (image only at the top)	But counted on the solder of diode vd564 (-14v)		NV ELETRONICA - VALDEMIR
PHILCO	PCS2956/58 PCS3220/22		Dark stripe on the left side from top to bottom	Replace the capacitor that goes to pin 42 of the ci 1501 (pip decoder)	jasvan souza