☰

Philco Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philco
Results: 4775
Make Model Symptom Problem Solution By
PHILCO PT-14U56
Turns on and off at the same time Philco turns on the led, presses the power part and turns it off at the same time cause solved (909) io resistor (r910) (r912) eletronica ceara
PHILCO TP-2054
The LED turns on and it doesn't work The power LED lights up, the power LED flashes, the defect and the diode (d909) and two resistors (r910) (r912) Replace eletronica ceara
PHILCO TPF2121
Defect: it is only on standby Cause: cap c715 no load klein
PHILCO TV-1452N
Turning off after + - 5 seconds R711 open c719 shorted 180 v line Replacement r711 and c719 Otrebor
PHILCO TP1452
Missing red color R812 smd on tube plate with cold solder Resolder it including the other components ANTONIO NOBREGA(PATOS PB)
PHILCO TODOS PH
Blue screen on all channels and the varicap was changed Memory (24c16) unrecorded Re-record it or replace it. RONALDO
PHILCO PH29C
Vertical shaking half up R305 1r8 open Varela
PHILCO TP-1452N
The TV screen is wide at the bottom and narrow at the top, looking like Christmas trees The defect was the deflector Replace Eletroclaudio Aguas Belas PE
PHILCO PCR 2049
CPH-06M 		No image with hissing in the speaker C730 100/50v BETOTECK
PHILCO TFP2130
Does not turn on, LED blinks R701 bad contact idasilvaj
PHILCO PCM2044
Blinking led R 720 open multsom
PHILCO PCR-1447
Dead Page 11, Page 13 Replace c911(100u/25 volt) and c913(1/100 volt) Jarbas santos (ELETRO-SERV)
PHILCO TP 2054
TV with a black stripe on the side C/705 smd Replace for 10 n Eletrônica Ômega
PHILCO PCM2046
There was no more b with 10v Capacitor c911 220uf 160v Replace without measuring tome
PHILCO PCS2976S
Does not turn on, no voltage on the secondary R911 aberto = 2m2 no pino 11 do ic 901 Bruske
PHILCO PCM-1444
Dead Defective flyback and open 180v r715 Jaison
PHILCO 14
Vertical closed and ci heats Replace o ci tda9309 Replace o ci tda9309 rafael
PHILCO PCS- 2976
The stand-by LED turns on, when trying to turn it on, the LED turns off but it does not turn on. Ic 903 = tl 431 FERNANDO S
PHILCO PCS 2976
Flickering image on the sides only at 220 vac C-919 from primary power supply 1n5 x 2kv FERNANDO S
PHILCO PH 21C
Call sometimes Q881-2n5551 / ic803-ka431 / r881-82r Replace mentioned items eletronicaapolo