Philco Repair Tips
Search: philco
Results: 4838
Results: 4838
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
NI
CPH-05 |
Inoperative or intermittent | Cold welding c911, replace c706 with polyester | ||
| PHILCO |
NI
CPH-05 |
Entering intermittent st-by | R713 open | ||
| PHILCO |
NI
CPH-04 |
Dull | C304 | ||
| PHILCO |
NI
CPH-04 |
Retrace lines on top | D304 | ||
| PHILCO |
NI
CPH-04 |
Turn on and off | Zd304 | ||
| PHILCO |
NI
CPH-04 |
Turns off intermittently | Priapism | ||
| PHILCO |
NI
CPH-03 |
Little shine | Flyback | ||
| PHILCO |
NI
CPH-03 |
Inoperative or intermittent power on | Change the 3 4.7uf caps of the power supply | ||
| PHILCO |
NI
CPH-03 |
After hot it turns off | Flyback | ||
| PHILCO |
NI
CPH-03 |
No contrast adjustment | R766 | ||
| PHILCO |
NI
CPH-03 |
W/o vertical sync when heating | D651 | ||
| PHILCO |
NI
CPH-02 |
Insufficient vertical deflection | R616, c607, c609 | ||
| PHILCO |
NI
CPH-02 |
Repulsing image | C216 | ||
| PHILCO |
NI
CPH-02 |
Without video and sound...with brightness | Cold welding in l206 | ||
| PHILCO |
NI
CPH-02 |
Weak antenna signal | Replace q201 | ||
| PHILCO |
NI
CPH-02 |
No horizontal synchronization | Qah07 | ||
| PHILCO |
NI
CPH-02 |
Image distorts intermittent | Cold welding in l203 | ||
| PHILCO |
NI
CPH-02 |
After it heats up it turns off | C607 with leak | ||
| PHILCO |
NI
CPH-02 |
Dead with whistle | Replace q903 | ||
| PHILCO |
NI
CPH-02 |
Negative image | Replace dl |