Philco Repair Tips
Search: philco
Results: 4838
Results: 4838
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
PCM 2044
|
Horizontal strip | Solda fria no pino 3 do fly back | ||
| PHILCO |
PC-14/2038
|
Disarming with 110v | D303 | ||
| PHILCO |
PC-14/2039
|
No characters | R612= 10k | ||
| PHILCO |
PC-14/2039
|
Dead | Q902 | ||
| PHILCO |
PC-14/2039
|
Disarming | Zd-702=22v | ||
| PHILCO |
PC-14/2039
|
Lines at the top of the video | C607 | ||
| PHILCO |
TP-1454
CPH-6 |
N/memorizes and vertical closed at the bottom | C118 and c119 | ||
| PHILCO |
PCS-2956
|
No image with retractions | Tda-8843 | ||
| PHILCO |
PVC-8200
|
Does not work, display is off | Fs02 | ||
| PHILCO |
PVC-6000
|
Works for a short time | Crush | ||
| PHILCO |
PVC-6000
|
Without video in pb with video in ee | Ic201 | ||
| PHILCO |
NI
|
Inoperative with display off | Ic do reset ou c904 | ||
| PHILCO |
PVC-6000
|
Display goes off after heating | Open printout | ||
| PHILCO |
PVC-6000
|
Shaky image, capture varying | C620 e c877 | ||
| PHILCO |
PVC-6000
|
Hang up | Modify r853 from 100k to 33k or 39k | ||
| PHILCO |
PVC-6000
|
Filter bars | C866 | ||
| PHILCO |
PVC-6000
|
Washes the screen with weak signal | Open printout of pin 41 of ic751 | ||
| PHILCO |
PVC-6000
|
Tape does not enter, but indicates its presence | Gr751 | ||
| PHILCO |
PVC-6000
|
Vertical bar over the image | Change c1301 and c1302 from 100 to 82pf | ||
| PHILCO |
PVC-6000
|
Tape doesn't go in, capstam motor doesn't run | Laugh |