Philco Repair Tips
Search: philco
Results: 4811
Results: 4811
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
PCS-2956
|
No image with retractions | Tda-8843 | ||
| PHILCO |
PVC-8200
|
Does not work, display is off | Fs02 | ||
| PHILCO |
PVC-6000
|
Works for a short time | Crush | ||
| PHILCO |
PVC-6000
|
Without video in pb with video in ee | Ic201 | ||
| PHILCO |
NI
|
Inoperative with display off | Ic do reset ou c904 | ||
| PHILCO |
PVC-6000
|
Display goes off after heating | Open printout | ||
| PHILCO |
PVC-6000
|
Shaky image, capture varying | C620 e c877 | ||
| PHILCO |
PVC-6000
|
Hang up | Modify r853 from 100k to 33k or 39k | ||
| PHILCO |
PVC-6000
|
Filter bars | C866 | ||
| PHILCO |
PVC-6000
|
Washes the screen with weak signal | Open printout of pin 41 of ic751 | ||
| PHILCO |
PVC-6000
|
Tape does not enter, but indicates its presence | Gr751 | ||
| PHILCO |
PVC-6000
|
Vertical bar over the image | Change c1301 and c1302 from 100 to 82pf | ||
| PHILCO |
PVC-6000
|
Tape doesn't go in, capstam motor doesn't run | Laugh | ||
| PHILCO |
PVC-5000
|
No color | Ic301 | ||
| PHILCO |
PVC-5000
|
Sometimes it changes speed | Modify r632 from 390k to 820k | ||
| PHILCO |
PVC-5000
|
Does not run capture in play | Ic602 | ||
| PHILCO |
PVC-5000
|
Poor or poor b/w image | Head amp with leak in caps. | ||
| PHILCO |
PVC-5000
|
Filter bars over the image | Cap 3300uf x 16v na power supply | ||
| PHILCO |
PVC-5000
|
Tape doesn't fit, cassette moves by itself | Flat cable branco | ||
| PHILCO |
PVC-5000
|
Identifies tape without having | Flat cable branco |