☰

Philips Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philips
Results: 14208
Make Model Symptom Problem Solution By
PHILIPS 20PT529A
No audio Speakers Replace speakers eletronicaapolo
PHILIPS 29PT4635/78
HC 		Noise at the kinescope connector at the focus input and turning off Change the connector and capacitor 2455 47mf/25v put 47/50 carlosss
PHILIPS 29PT5645/78
Does not turn on or turn on stand-by Leaky diode in the primary of the 6532 stand-by power supply. Replace the bav21ws diode and ok. toinho eletron
PHILIPS 20PT3131/78
Reduced vertical at the top folded image C2460 68k poliester Replace ze nunes
PHILIPS 29PT5642
L04 		Power supply does not weapon 6v diode 2536 short Replace component CSOM
PHILIPS 20PT123A
Doesn't start Fly back / ov2094/41 Replace the fly eletronicaapolo
PHILIPS AZ1575
Doesn't start Q7006/7007 bc337-25 Replace items mentioned and check resistors 3022/3023/3024 and 3037 eletronicaapolo
PHILIPS 14GL1316
Osd does not come off the screen Oxidized touch key tracks Retrace the trails eletronicaapolo
PHILIPS 21PT5435
Turns on and after the plot appears (lights up the screen) the television turns off in approximately 10 seconds. Replace the 6445 smd diode also replace the 2455 electrolytic 10ufx35v. Replace the 6445 smd diode also replace the 2455 electrolytic 10μFx35v. WAGGUINHO
PHILIPS 21PT9467C 78
SK 4.1 LCA 		It turned on and the channel character appeared and when it turned off it went to STBI Defect abl c303 open replacement Problem solved eletronica poleza
PHILIPS 29PT4635/78
Does not turn on but the stand-by LED blinks C2455(47uf/25v) AELSON
PHILIPS 25PT848A
No screen image with 0 volt Shorted screen pin In my case, I tapped the series lamp from the ground to the screen on the tube and the short came out ANTONIO NOBREGA [PATOS.PB]
PHILIPS 14PT1686/01B
L01.2E 		Lights up and goes out after a few seconds Transistor 7313 on the kinescope board shorted jose almeida tavares
PHILIPS FWC270
No sound! When you remove the power cable from the socket, audio comes out in the boxes 8817 10/02/10 ] [60.00 The defect was the MOSF 7302 =stp16ne06, I removed it and the sound started working normally again, I put one from the scrap IRFZ48N and it was great. marcos melo . CASCAVEL CEARA
PHILIPS 21PT5435
No color Replace epron 24c16wp Nilton Neves
PHILIPS 32PW 8608-12
Just open the kinescope a little I don't know, I wish you could give me a tip luis cunha
PHILIPS 29PT 4635
L01-1C 		Burnt bu 4508 was replaced and didn't work It was c2455 luizsa
PHILIPS FW C270
No sound at 220v put normal sound at 110v Def. fe 7302 p16ne06 ou equiv. irf822 Help yourself leave your tip ELETRONICA ARNI>L. LEAL-SC
PHILIPS 14PT 110A
Does not turn on pulsating power supply C 2550 331n x 1k6 shorted Just change it and it was ok! CARLOS AUGUSTO ELETROSILVA CANAVIEIRAS BAHIA
PHILIPS 21PT230A
Time calls time doesn't call C 2442 smd with cold soldering, just resolder and go for the hug CARLOS AUGUSTO ELETROSILVA CANAVIEIRAS BAHIA