Philips Repair Tips
Search: philips
Results: 14209
Results: 14209
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
29PT4635/78
|
After turning on, image oscillates between RGB and off | Trc / cinescopio | Replace of the same | eletronicaapolo |
PHILIPS |
14GL1010
GR1-AL |
I'm a year old | R 621 cut | Replace | Elias2305 |
PHILIPS |
14GX1618/78R
ANUBIS VA |
Jagged image | Cap 6531 47/ 160 volts, one of the terminals was corroded, as it is glued, you can't see it, you can only remove it from the board. | jorge mota | |
PHILIPS |
21PT5435
L03.LAA |
Alloy keeps buzzing in socket with spark of fire white screen flashing cmo frorecent | It appears to be the socket or very high horn coming from the flayback. but the defect is the tube | Replace the bubo | |
PHILIPS |
21PT8467/78
|
Normal audio and characters, no luminance | 100k resistor, position r3442, line abl | Replace the same | eletronicaapolo |
PHILIPS |
29PT4643
|
Vertical keeps shrinking at the bottom and sometimes turns off | Chap. 2625 (smd 2.2uf x 6.3v) close to the Audio ci | Ronie Grein | |
PHILIPS |
14GL1015
|
Low power supply less than 40v | Flyback shorted between pins 9 and 10 | ELETRÔNICA GOMES | |
PHILIPS |
14GL1015
|
When you tune in, it's black and white or changing the channel has interference | Broken channel processor | ELETRÔNICA GOMES | |
PHILIPS |
14GLK1015
|
Dead, supply low less than 40 v, | Short flyback, pins 9 and 10 | ELETRÔNICA GOMES | |
PHILIPS |
20GX1659
GR6-AL |
The TV has sound but no image, when you open the screen, it gives you a dark, speckled screen (the stand-by LED flashes four times) | Saida vertical tda8356 | Replace tda8356 | Eletronica Som & Imagem |
PHILIPS |
14PT
|
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS |
20PT
|
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS |
21PT5433
|
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. | On the third and fourth pin of the seletronic tsound is each one a resistance (smd 101) that is 100Ω. | heliomar | |
PHILIPS |
21PT5433
|
Without image but with sound and menu characters | When turning on this TV, it came with no image but with sound and tuning. The screen was completely dark, the menu characters acted and were visible on the screen but the channel image was missing. | 100k resistor 3442 fully open, it works close to the flayback but precisely on pin 10 of it | |
PHILIPS |
20MT2131
|
TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, those of 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | |
PHILIPS |
20PT3336
|
TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | |
PHILIPS |
20PT3333
|
TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | |
PHILIPS |
20PT3331
|
TV with vertical closed at the bottom and no sound | Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp | It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v | |
PHILIPS |
20PT3336
|
Does not turn on, +b 103v ok, when it turns on it only gives a small pulse on the fly and stops, (can be observed with a neon lamp) | R3445 of 1r/1w changed, or check all fly secondary street. | Bruske | |
PHILIPS |
20GX1656
|
Image with ripple and power supply fet heats up excessively. | Replace ic 7520 (uc 3842bn) | Persio(TVCOMPANY) |