Search: philips
Results: 14208
Make Model Symptom Problem Solution By
PHILIPS 21PT5433,78
L03
Burns horizontal output Solve micro tda 9370 Completed E. MATOS
PHILIPS 21PT1353/00
L6.2 AA
After a certain period of time it is on, tsound is no sound and opening vertically C2423 and c2515 of 47uf/160v 105º joaquim cunha
PHILIPS 29PT4631
It didn't turn on and off, arming and disarming C47/25v proximo ao bd32725 Replaced it and it's new rubens souza
PHILIPS 29PT5632/78R
Vertical.closed. with wavy line and excessive noise in the deflector coil.vert. opens with a ripple in the middle of the screen. Deflector coil. mentel
PHILIPS 29PT4631
It would turn on, horizontal interference would appear and it would turn off. Replace transistor 7461 7463 and c2455 Resolved nachbar
PHILIPS 29PT4640
Does not activate horizontally, degausser relay keeps turning on and off Diodo zener smd 6541 pardalzito
PHILIPS 29PT552A/78R
Don't care, keep trying Replace c2450 47uf x 160v Sidney Alves
PHILIPS 29PT558
When turning on normally, after a few minutes it loses synchronization Microprocessor Replace of the same eletronicaapolo
PHILIPS 21PT9467C/78
SK4.1L
No sound via rf in normal av C801 10uf leak, replace NelsinhoPira
PHILIPS 29PT4635
Doesn't start Horiz exit. shorted Replace os trans. q7460 / q7461 / q7463 e c2455 eletronicaapolo
PHILIPS 29PT4643
Does not connect sh in short When changing the sh, it heated up until it burned. Replace o fly (jj0501-8604) cabeção natal
PHILIPS 14PT3336/78
Doesn't work Resistor r3445 (open) almirguarani
PHILIPS 20PT120
It doesn't turn on, when you plug it into the socket it gives a crackling sound (it's loud, everything is fine but tsound's no sound or image). Check the ci tda 8360 look at the iron sheet that surrounds it Resolder the plate that covers the ci tba8360 deusomar
PHILIPS 2IPT8467/78
No RF sound, AV sound only Cap heletrolitico 10uf*50v - loc -2205 Replace faulty component JDANTEX
PHILIPS 29GX1899
Stop Coil pin deflection bad contact burning by448 diode and horizontal output Resolder the deflection pin, replace the diode by 448, I didn't have it by 448, I put it by 228 and it works, replace the horizontal output transistor and run for a hug. fernando timbauba .PE.
TV PHILIPS 21PT9467C/78
Without image and normal characters. D-302 aberto Replace wagner
PHILIPS 29PT9467/78
SK5.0A
Completely stopped Shorted power supply regulator. Replaced ci-w6556a-pos.601-supply regulator. Clayton
PHILIPS 29PT5645
Vertical retrace, folding image at the top of the screen. C2465 = 10/100v in the vertical stage Bruske
PHILIPS FW670P
When you increase the volume it goes to total (maximum) Replace eprom Schulz
PHILIPS 29PT4635/78
After turning on, image oscillates between RGB and off Trc / cinescopio Replace of the same eletronicaapolo