Search: philips
Results: 14232
Make Model Symptom Problem Solution By
PHILIPS 20PT3331
TV with vertical closed at the bottom and no sound Main cause is the 24c16wp eprom memory, tsound is no point in adding another 24c16 type, it has to be the same as the 24c16wp It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 20PT3336
Does not turn on, +b 103v ok, when it turns on it only gives a small pulse on the fly and stops, (can be observed with a neon lamp) R3445 of 1r/1w changed, or check all fly secondary street. Bruske
PHILIPS 20GX1656
Image with ripple and power supply fet heats up excessively. Replace ic 7520 (uc 3842bn) Persio(TVCOMPANY)
PHILIPS 14PT110
Inoperative without any power supply 6540 diode track open on cabinet support ANTONIO NOBREGA [PATOS.PB]
PHILIPS 29PT5645
Does not turn on or turn on stand-by Fotoaclopador et1103 Replace photo coupler ET1103 Eletronica Som & Imagem
PHILIPS 20PT326A
LED blinks once and turns off Check driver transistor
PHILIPS 20PT326A
LED flashes 4 times does not turn on Transistor 7608 smd
PHILIPS 29PT5642
Vertical with lines at the top (when alloy comes with 3 lines at the top) Check c2465 10mf/160v Badri
PHILIPS 21PT5433
Bu \ warms up turns off C 2455 Ok ROBERTO
PHILIPS 29PT552A
Oscillates and at the same moment turns off... LED flashes and then lights up... goes into protection Transistor 7481 (bc557) changed Replace Rogério
PHILIPS 29PT552A
Oscillates and at the same moment turns off... flashes and then lights up..... goes into protection Transistor 7481 (bc557) changed I replaced it, it was a show......
PHILIPS 29PT4636/78
L01.1L
It doesn't turn on, the LED doesn't light up like death, it has all power supply voltage C 2455 measures good, for horizontal oscillation with oscilloscope, no current for transistor bu4508 C 2455 replace without measuring Benasse
PHILIPS 21PT5431
Turns off after thirty seconds Defective transistor 7461 bc337 Replace it even if it is in perfect condition and adjust the screen Edilson Bomtempo
PHILIPS 14PT 316A
Bad fly back and subsequently burning horizontal exit R 3662 180r open r 3538 82k changed r3517 10k changed these resistors changed was raising the supply to 112v and the normal is 99 v CARLOS AUGUSTO
PHILIPS 21PT8467/78
SL03.1L31
Vertical closed beeping appearing to be horizontal R3445 1r open CARLOS AUGUSTO
PHILIPS 14GL1310
I'm sound Oddly enough, the 12v zener (d147) was altered. Replace d147- 12v bick_sjs
PHILIPS 21PT5433/78R
The image began to shift to the right with a dark band in the horizontal direction and burned. the horizontal but11apx. made the change and the TV worked but within a few minutes the same track. I replaced the but11apx and c2447 from 22mf x 250v to 4.7mf/250v wagner
PHILIPS 20PT228A
Totally inoperative C2409 , c2561 c@rlinhoselectro
PHILIPS HTS-3365X/78R
Distortion in the subwoofer Distortion in the digital audio stage. Track recovery between pin 223 of ic209 and pin 13 of connector rb403 (tsd2) mcgayver
PHILIPS 29PT4635/78
On-screen video ring only in uhf Add a 1k capacitor in parallel with the horizontal drive bc337 - q7461 - horizontal drive Modification GEMASI