Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
21PT5435
|
Dark screen | Check r3442 100k | ||
PHILIPS |
107E
|
Osd varying brightness | Check dip switches for anomalies | Nilson Barbosa | |
PHILIPS |
29PT5645
|
No audio | Check tr 7991 | ||
PHILIPS |
20PT3331
|
No audio | Capacitors 2201(4n7 smd) or 2202(820pf smd), checking both only one of them can produce this symptom | ||
PHILIPS |
FWC-780
|
Device turns on, disarms and goes into demo | Stk short | ||
PHILIPS |
20PT3331
L03.1LAA |
No audio | C2201-4n7 which comes out of pin 31 ci7200 (tda9370). | ||
PHILIPS |
14PT3336
L03.6L CA |
Dark screen with osd | Replace r3442 (150k) | ||
PHILIPS |
20PT228
|
Turn off | 220r r3347 on kinescope board | ||
PHILIPS |
20GL1349
|
Little contrast | R-3556 (1k) changed | ||
PHILIPS |
14PT1532/00
L6.1 AA |
When tuning, you can only tune in the VHF band. When changing to UHF, it stops at weak signal positions, always following when it reaches a station that we want to save. | Signal too strong. | By lowering the gain in the agc, we can now tune all the stations. Then just put the AGC control as it was. | |
PHILIPS |
29PT4641
29PT4641 |
Turns on, 3 lines of red, green and blue colors appear at the top of the screen and the TV returns to standby. | D6457 with leak. | ||
PHILIPS |
20GL1344
|
Excessive vertical | R3415 – 220r | ||
PHILIPS |
GL1316
|
R 3342 aberto (6k8) | |||
PHILIPS |
PT3131
|
Vertical closed | Led flashes 3 times and turns off, r 3448 open (1r) | ||
PHILIPS |
PT110A
|
Does not work, with noise | D 6445 shorted (ph33m) | ||
PHILIPS |
GL1014
|
Horizontal doesn't work | R 3224 open (2r2) and q 7205 shorted | ||
PHILIPS |
GL1340
|
No sound with/noise | C 135 shorted (22kpf) | ||
PHILIPS |
29PT4631
|
Turns off by itself | Q 7461 and q 74636 changed (swap) | ||
PHILIPS |
GL1040
|
No sound with/noise | C 130 shorted (22kpf) | ||
PHILIPS |
GL1040
|
No image with/lines | C 410 and 419 sold out |