Philips Repair Tips
Search: philips
Results: 14208
Results: 14208
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
107
|
Without horizontal oscillator | Leak in fet 7605, resistor 3621 changed | Andrade Sequeira | |
PHILIPS |
20PT3331
|
No sound normal image | Memory | Memoria 24c16wp | Alvaro |
PHILIPS |
29PT4631/78
|
Does not tune channels | Reprogram eeprom memory | Use pony to reprogram memory | Sérgio |
PHILIPS |
20PT3336
|
Dark screen with retrace | Check r3441 and r3442 | Andrade Sequeira | |
PHILIPS |
14PT418A/78
|
Turns off after seconds | R3547(0.22r) changed and d6405 | Andrade Sequeira | |
PHILIPS |
DVP3005
|
Fica em std. by | Leaky power switch | ||
PHILIPS |
DVP4000
|
Tsound is no video in the "video" terminal but tsound is in y | Hold down key 1 for a few seconds | ||
PHILIPS |
20PT524
|
Vertical with jumps and stretched | C2409 | ||
PHILIPS |
20GL1345
|
No video retrace lines | C2410 - 100x25v | ||
PHILIPS |
29PT5632/78
|
AV inputs don't work | Ci hef 4053bt | SILVIO DF | |
PHILIPS |
14PT1363/11
L6.1 AA |
Power supply ok. when turned on it makes a hissing noise in the horizontal area and it doesn't start. | Change capacitor in position 2423 (330pf/1kv). | Duartes | |
PHILIPS |
16CT6010M
|
Partially closed width | Capacitor c508 | Replacement | Welber |
PHILIPS |
F800
F800 |
Turns on and off in 15 seconds | The screen control was adjusted and the 27v zener was changed for a 33v one. | ||
PHILIPS |
14PT316
|
White with retrace (return) lines | Check capacitor 2211 and resistor 3322 | www.rmeletronica.com.br | |
PHILIPS |
20PT3331
|
Turning off after 5 seconds | Transistor de rgb bf 422 bf 423 | Replace even if it's ok | severino alves ferreira |
PHILIPS |
20GL1049
|
Burning vertical outlet | Tsh changed | orlando batista | |
PHILIPS |
20PT4331
|
Doesn't start | Trafo drive horizontal | rmeletronica.com.br | |
PHILIPS |
21PT 6432
|
Power supply does not weapon | Photo-coupler (7515), even if it is normal, replace it with a new one | Marcelo | |
PHILIPS |
LX 600
|
It turns on normally and after a while it locks all functions, to turn off just by pulling the plug. | Desoldering with micro workstation. | Bruske | |
PHILIPS |
21GL1369 /78R
|
Green screen retrace lines | Raah15 | Silvano |