Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
A10
|
Procedure to view customer service menu | Press mute button on handset and any button on the tv, hold for a few seconds and menu will appear | ||
| PHILIPS |
25PT4423 L6.2
|
Stuck in standby, led on, no ht | There may be no 5v to the microprocessor. check r3509 and d6501. replace r3509 with a 47k 1 watt version 4822 053 10473. d6501 is type bzx79b5v6 4822 130 34173. check the +150 volt rail, 145v is too low | ||
| PHILIPS |
VR200
|
Unit not working, no fl display, ticking from psu, head drum twitching | Electrolytic cap in psu primary dried up 47uf, 50v | ||
| PHILIPS |
28PD6932 /78
|
Turns on after 30 seconds turns off | Tr 7461 | ||
| PHILIPS |
20PT3331
|
Image changing color tone on and off | Check c2318 and d6318 | ||
| PHILIPS |
FW380C
|
Crackling sound, radio does not work | Cap smd 10k no volume potentiometer | ||
| PHILIPS |
L04
|
With vertical bar(s) or stripes | When turned on, the image is shifted to the right with a dark bar on the left side, check for possible leakage in capacitor 2486 (27pf). | ||
| PHILIPS |
20PT3331
|
Folding vertically at the top | C2460 - 68k | ||
| PHILIPS |
14GL1316
|
Escapes tune | Leaky transistor ph2369 | ||
| PHILIPS |
21PT5433
|
When connecting with colored lines and then with retraction | C2460 polyester, c2465 vertical electrolytic | ||
| PHILIPS |
29PT5632
|
Does not turn on, there is a power supply in the primary | Photocoupler 7515 | ||
| PHILIPS |
K40 CHASSIS 26CS4895-02R
|
Sound low and distorted | C/r tda 2545 ic in if module. | ||
| PHILIPS |
MD1.2 E
|
Red flyback lines ,visible in black parts | Pcb under line transformer broken | ||
| PHILIPS |
MD 2.21 AA 28PT7303
|
After replacing loptx set starts up with brief eht then reverts to st/by | Fet on same heatsink as bu2520 is s/c | ||
| PHILIPS |
L 6.2
|
Reverts to st/by at sw on | Beside replacing t7505 also replace t7500(bc858b)+d6500(5v1) +c2511 (22uf) | ||
| PHILIPS |
G90B
|
Blank screen no sound ht low | C2660 680µ16v 5v res cap | ||
| PHILIPS |
FL 1.0
|
Wont turn on. 3 green led is blinking - after 3 sec 2 green and 1 red blinks fast. | Powerlines comes up,but fall down again. set goes in prot.cure: replace loptx philips nr 38143 can be replaced by hr 6581 | ||
| PHILIPS |
|
||||
| PHILIPS |
W66ESF02X14 A8.0EAA
|
Dead with red led flashing & smell of burning | C2633 1500pf 2kv by side of loptx burnt | ||
| PHILIPS |
VARIOUS
|
Accessing service mode | Try pressing the following keys on the user remote control- 0,6,2,5,9,6,osd |