Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
NC3
|
Ringing pic, weak & buzzing sound | Check sawf & ceramic filters in if | ||
| PHILIPS |
NC3
|
Raster blank osd works | Tda3565 us | ||
| PHILIPS |
NC3
|
Poor contrast & no sound | R416 10r in 22v feed | ||
| PHILIPS |
NC3
|
No tuning adjust - original settings ok | Bad contacts on chan switch | ||
| PHILIPS |
NC3
|
No sound and poor contrast | R416 10r oc | ||
| PHILIPS |
NC3
|
No picture & garbled sound. | Channel change switch s300. | ||
| PHILIPS |
NC3
|
No pic just blank raster - sound ok | Sandcastle pulse dist - break in print between r570 & sc gen o/p from ic pin27 | ||
| PHILIPS |
NC3
|
No pic for first 2 hours | Replace tda3565 dec chip & adj r635 ref osc. to adj s/c pins 5 & 1 of chip | ||
| PHILIPS |
NC3
|
No picture - sound ok | No a1 volts - loptx faulty | ||
| PHILIPS |
NC3
|
No colour - brightness/contrast inoperative. | Ic tda4505. | ||
| PHILIPS |
NC3
|
No colour | Try adjusting r635. | ||
| PHILIPS |
NC3
|
Not cabbage | Replace tda3565 dec chip & adj r635 ref osc. to adj s/c pins 5 & 1 of chip | ||
| PHILIPS |
NC3
|
Motorboating sound with green raster | C2483 dry joints had damaged 5v reg 78m05 | ||
| PHILIPS |
NC3
|
Monochrome pic with false line lock | Misshapen sandcastkle pulse caused by tda4505 chip - also check 680k line pulse feed res | ||
| PHILIPS |
NC3
|
Intermittent poor picture & garbled sound. | Channel change switch s300. | ||
| PHILIPS |
NC3
|
Int pic | R608 18r dry joint | ||
| PHILIPS |
NC3
|
Horizontal lines and streaks | C2413 100µ 400v o/c | ||
| PHILIPS |
NC3
|
Goes into prot mode aft half an hour | 100v ht had gone high - cnx62 opto coupler faulty | ||
| PHILIPS |
NC3
|
Field foldover | R556 high ( 24k ) | ||
| PHILIPS |
NC3
|
Field - lack of height | R581 3m9 hi res connected to 95v supply in tda4505 cct |