Search: philips
Results: 14209
Make Model Symptom Problem Solution By
PHILIPS KT3
Col fades out after 2 hrs C56 0.1µ connected to pin 23 tda3560 faulty
PHILIPS KT3
Channel change - intermittent. Ic70 ( 4074 )
PHILIPS KT3
Brightness - intermittent. Drys on plug by high wattage res on remote pcb.
PHILIPS KT3
Blank raster. Ic tda2571 sync/line ic.
PHILIPS KT3
Blank raster with flyback lines. R587 ( 100r ) by drive pre-sets change in value 160v feed to rgb
PHILIPS KT3
Blank raster with flyback lines R455 sc 560r 1w.
PHILIPS KT3
155v rail low. Dj on r1583 ( 2r2 )
PHILIPS K40
Whistling Bu508 short check ic7120 opto ( cnx62 )
PHILIPS K40
Very faint raster Check the tda3561 colour ic
PHILIPS K40
Txt lines showing at top of pic C2107 100µ 50v
PHILIPS K40
Txt lines at top of pic C2107 100µ
PHILIPS K40
Striations on left-hand side. Check r3191 for o/c.
PHILIPS K40
St/by only - no line drive Ic tda3576b; r3192 680r o/c
PHILIPS K40
St/by only - hiss from spkr Red lead from psu cracked internally
PHILIPS K40
Squealing - no go. R3192 ( 680r , 1w ) on pcb under crt neck.
PHILIPS K40
Sound - no sound or picture. Dry joints on l5157 leave on for few hours tda3576.
PHILIPS K40
Sound - no sound - eht cap leaking. Ic7202 ( hef4052 ) on power/scart board.
PHILIPS K40
Snowy screen - no tuning volts R3104 18k on main pcb
PHILIPS K40
Slow starter C2128 100mfd ( s.mode series cap. )
PHILIPS K40
Raster - blue with flyback lines. C2216 leaky.