Philips Repair Tips
Search: philips
Results: 14245
Results: 14245
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
2A
|
Dead | R3654 1r 5w surge lim o/c; d6655 mains rect s/c; but11 chopper tr s/c; c2664 1n5 1kv cracked | ||
| PHILIPS |
2A
|
Dead | D6663 sc | ||
| PHILIPS |
2A
|
Dark screen. | C2496 defective (22 nf; polyester flat foil 100 v). | ||
| PHILIPS |
2A
|
Contents of memory lost | Replace battery 1925 (4822 138 10313) | ||
| PHILIPS |
2A
|
Chopper sc after replacing if set put in stby set | Raatdhas era as datdhas instrument | ||
| PHILIPS |
2A
|
Channels not storing. | Replace selector part no. 459 61047 | ||
| PHILIPS |
2A
|
But11af sc. fuse blow etc | Check d6664 , bridge , cnx62 opto coupler , | ||
| PHILIPS |
2A
|
But11 sc. | Check that l5687 is still intact ( in series with but11 base ) | ||
| PHILIPS |
2A
|
Bright pic + flyback lines | R3473 910k oc | ||
| PHILIPS |
2A
|
Blowing t7618. | Drys on t5632 ( lop drive tx ) | ||
| PHILIPS |
2A
|
Blowing but11a - may last days. | Change chopper transformer ( will look ok ) | ||
| PHILIPS |
2A
|
Blank raster & no sound. | Memory back-up batt. | ||
| PHILIPS |
2A
|
Black lines on pic , like every other line missing | C2050 47mfd , 50v in if. can | ||
| PHILIPS |
2A
|
Bars in picture. | 199v on collector ts7422. (has to be 193v). r3427 (300k; 4822 116 52268) defective (for green) r3407 (300k; 4822 116 52268) defective (for red) r3447 (300k; 4822 116 52268) defective (for blue) | ||
| PHILIPS |
2A
|
After flashover of picture tube, set is in protection mode. | Set works again after turning on and off. solution: connect a 100Ω resistor (4822 116 52175) between gate of d6698 and junction r3698/c2698. | ||
| PHILIPS |
2A
|
140v voltage is 120v. stand-by and ext1 leds are on. | Diode 6663 (1n5062; 4822 130 41275) short-circuited, ic7830 (mab8441p/t001; 4822 209 11037) defective. remarks : only for sets with citac module. | ||
| PHILIPS |
29PW6332/05
|
No text, no dolby or zoom features not working | Reset options using service tool press "align" a menu appears reset relevent options from "n" to "y" | ||
| PHILIPS |
29PT9416 MG7.1
|
Service mode entering | Use the standard remote control and key in a special sequence '0,6,2,5,9,6' followed by pressing the 'menu' button. if the main menu also appears with the service menu just press 'menu' again to clear it.. the other way is to short the two service pins on the signal panel (pins 2 and 3 of connector 0356). the advantage of this last method is that all the software protections are turned off. | ||
| PHILIPS |
29PT9113C
|
White box bottom left of screen | Auto subtitle selected switch off from handset | ||
| PHILIPS |
29PT8444
|
Correction to position 21 of styling 220 | Correction to position 21 of styling 220 of product survey 1999-3 (3122 785 10300 the code numbers mentioned for the aluminium columns at position 21 of styling 220 are not correct. the correct code numbers must be: 21 4822 466 12216 aluminium colum |