Philips Repair Tips
Search: philips
Results: 14206
Results: 14206
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
ANUBIS
|
Volume doesn't go down | Wrong integrated microprocessor (7600), it should be anbr 500 m11. * Jul 95 jpba *. | ||
| PHILIPS |
ANUBIS
|
Vertical deformed compressed parts | Integrated 7400. * nov 95 anc *. | ||
| PHILIPS |
ANUBIS
|
Vertical with little amplitude | Deflector unit. * 13dec95 jpba *. r3411, 3412, c2402. *18Sep98 h.desk* | ||
| PHILIPS |
ANUBIS
|
Vertical opens slowly. | Check regulator 7218. * 15oct97 jpba *. | ||
| PHILIPS |
ANUBIS
|
Voltages above specified | High vo see 2512 (1uf) open. Sep 94 anc. 3511 resistor (24k) changed. * 02Oct96 jpba *. | ||
| PHILIPS |
ANUBIS
|
Voltage oscillating (pulsating). | Resistor 3530 (3.3e) open. * 15jan96 anc *. coil 5523 (4.7uh) open see also resistor 3513 (12e) in the module. * 26Feb96 anc *. | ||
| PHILIPS |
ANUBIS
|
Green fabric | 3741 resistor on the trc board. * Aug 95 ctr *. | ||
| PHILIPS |
ANUBIS
|
Screen half dark or noisy. | Capacitor 2446 open. *dec 94 egs*. | ||
| PHILIPS |
ANUBIS
|
Dark "black" screen (see also bril4). | Ic 7400, this occurs due to the increase in the dc level of the line sand castle. *rat out 95 anc*. check TRC board resistors 3707, 3717 and 3727; possibility of being open. * Aug 95 ctr *. resistor 3209 (12Û) open, vert 3211 (330Û) and | ||
| PHILIPS |
ANUBIS
|
Intermittent sound (crashes, hiccups). | Ver solda do resistor smd 3801 (2k). * 20dez95 ctr *. | ||
| PHILIPS |
ANUBIS
|
Distorted or noisy sound. | Resistor 3801 com solda fria, no decoder. * out 95 mjs *. | ||
| PHILIPS |
ANUBIS
|
Squeaky sound | Integrated 7225. * ju 95 ctr *. | ||
| PHILIPS |
ANUBIS
|
Low sound. | Check the possibility of being in hotel mode, if not check programming table error. * 10jan97 anc *. | ||
| PHILIPS |
ANUBIS
|
Just tune in to channel 2. | Open 3650 resistor (there is no 33v). *may 95 jpba*. | ||
| PHILIPS |
ANUBIS
|
I only exit STBY using the channel keys. (not on/off) | Check vo adjustment (95v), when high it activates the protection, if it is ok (+95), it may be a change in the line protection 95 in this case see resistors 3560/3561(56Û), 3562 (470Û); diodes 6562 (4v7), 6618 (9v1), 7636 (bc548). * 10Sep96 anc *. | ||
| PHILIPS |
ANUBIS
|
It only comes out of stand by by local command, not remote | Integrated 7600. * out 95 anc *. | ||
| PHILIPS |
ANUBIS
|
So fica em stand by (power off). | Verificar cristal 1630 de 12mhz. * jul 95 anc *. eprom 7710. * out 95 anc *. receptor (1602). * 20dez95 mjs *. | ||
| PHILIPS |
ANUBIS
|
Tuner with little gain | Leaky capacitor 2265. * 04Jul96 jpba *. | ||
| PHILIPS |
ANUBIS
|
Varying tune. | Integrated 7225. * jun 95 ctr *. | ||
| PHILIPS |
ANUBIS
|
No voltage (vo, +b, hvt, etc.). | There is no +95v and +5v, possible short on the +95v branch, check possible leak in flyback 5445. * 10jan97 anc *. |