Philips Repair Tips
Search: philips
Results: 14253
Results: 14253
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
ANUBIS
|
Loses memory while running. | After a sudden loss of brightness, it goes to the initial channel, check micro ic 7600. * mar 95 ctr *. | ||
| PHILIPS |
ANUBIS
|
There are no colors | Avoid yoke cable close to the crystals. * nov 95 jo *. trail open at jump 9694. * 10jan96 anc *. integrated 7255 (tda4461). * 11jan96 anc *. integrated 7225 (tda8361). * 12Feb96 anc *. | ||
| PHILIPS |
ANUBIS
|
There is no contrast | Check open resistor 3460. * 21 Aug97 jpba *. | ||
| PHILIPS |
ANUBIS
|
Does not come out of intermittent stand by, or does not turn on. | Check vo setting (95v), when high it triggers the circuit protection, see resistor 3561 (56e). * 10Sep96 anc *. | ||
| PHILIPS |
ANUBIS
|
Does not turn on via remote control. | Diode 6618 (bzx79 9v1) leakage, only occurs with the on/off key, through the channels ok. * 26feb96 hbg *. see 7636 (bc548). | ||
| PHILIPS |
ANUBIS
|
It doesn't work (just screen with drizzle). | Cristal 1630 (12mhz). * jul 95 anc *. | ||
| PHILIPS |
ANUBIS
|
It doesn't work (it stays off). | Diode 6446 shorted, (output h). *set 94 egs*. resistor 3517, (3,3e), (power supply). * set 94 egs/ctr *. shorted 6441 diode (drive). * Dec 94 jdcc *. check vertical stage (1449/7400/6416/2414/mcss) if is closed, it causes the loss of c | ||
| PHILIPS |
ANUBIS
|
No characters/menu appear. | Verificar transistor 7635 (bc548b) com fuga. * 03mar97 anc* ts7634, s5720, c2721, c2722, ic7600, 7225 e sand castle. *18set98 h.desk* | ||
| PHILIPS |
ANUBIS
|
Does not open vertically | Capacitor 2415 open. * Jul 95 jdcc *. capacitor 2404. * 29ago96 jpba*. resistor 3403 (2k7) open. *02oct96 jpba *. c2426, 2427, 2414, d6416, 6449, 1449, ic400, 7225, +26 power supply. | ||
| PHILIPS |
ANUBIS
|
Return lines (retraction). | 7400 damaged due to probable power supply increase | ||
| PHILIPS |
ANUBIS
|
Thin line in the center (horizontal). | Solda fria no resistor 3448 (330e). * nov 95 anc *. | ||
| PHILIPS |
ANUBIS
|
Stand by led does not turn off. (device on) | Check micro ic 7600 in service position, when in operation may flash twice and act with control or flash 5 times and do not operate with control. *anc*. | ||
| PHILIPS |
ANUBIS
|
Flashing led (random). | 1 blink RAM problem (micro) 2 flashes date and clock line 3 eeprom flashes 4 PLL blinks of the tuner (varicap) 5 blinks problem reading after writing (see programming/eeprom) 6 blinks | ||
| PHILIPS |
ANUBIS
|
Poor width | Check resistor 3512. * apr 95 jpba *. | ||
| PHILIPS |
ANUBIS
|
Indicates error (er..). | Er6 = see capacitor 2512 (1mf). *set94 anc*. er3 = broken jump track 9606 pin 6 of 7710. * 13nov95 anc*. er5 = eeprom 7710, when changing channels the screen goes dark and returns to the home channel. * 13Dec95 BC *. er3 = integrated 7710. * | ||
| PHILIPS |
ANUBIS
|
Flickering image (see serr1). | Image shakes when increasing sound, performing shielding on 5525 and check information o6ct9405. integrated 7510 (uc3842) in the power supply module. *15jan96 anc* check 3513, 3530, 6519, 5523 and 3517. * 26Jul96 anc *. leaky 6513 diode. * 23set96 ctr | ||
| PHILIPS |
ANUBIS
|
Jagged image (see train1). | 6519 diode short.**. check power supply module. * 05Jul96 jpba *. | ||
| PHILIPS |
ANUBIS
|
Image folded vertically (i). | Solda fria no resistor 3448 (33oe). * nov 95 anc *. | ||
| PHILIPS |
ANUBIS
|
Stripe on the right side (i). white/pink/dark | Integrated circuit (delay line) 7255. * Jul 95 ctr *. | ||
| PHILIPS |
ANUBIS
|
Light band in the center (i) varies with brightness/cont. | Resistor 3556. * ago 95 ctr *. |