Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS ANUBIS
No sound. (with or without image for TV, VCR). Integrated 7710. * set 94 egs *. integrated 7225. * nov 95 ctr *. cold solder on smd 3801 (2k), on the decoder. * 06Feb96 anc *. check diodes 6809 and 6810 short. * 25Aug97 jpba *.
PHILIPS ANUBIS
No sound, but there is amplifier noise. Check possible leak in transistor 7269. * 22ago97 jpba.
PHILIPS ANUBIS
Without tune. Ver resistor 3648 (22k) e 3452 (47Û). * 02out96 jpba *.
PHILIPS ANUBIS
No tuning for high channels. Device with wrong micro anb4v1 instead of anbr500. * 05Jul96 jpba *.
PHILIPS ANUBIS
No vertical sync (vert5). Check regulator 7218. * 10oct97 jpba *.
PHILIPS ANUBIS
No h/v sync. 6441 diode shorted. *dec 94 egs*. trail open at jump 9694. * 10jan96 anc *. integrated 7225 (tda8361). * 11jan96 anc *.
PHILIPS ANUBIS
No vertical linearity. Resistor 3405 (47Û). * 02Oct96 jpba *. check changed resistor 3404 (1k5). * 20jun97 jdn *.
PHILIPS ANUBIS
No colors in ntsc Check programming. * Jul 95 ctr *.
PHILIPS ANUBIS
Loud noise with antenna (drizzle) Check capacitor 2265 pin 48 of tda8361. 25Apr97 jpba.
PHILIPS ANUBIS
Loud noise (air leak). Capacitor 2530 (2k2) aberto. * 17nov95 anc *.
PHILIPS ANUBIS
Small frame Integrado 7225 (tda8361). * 12fev96 anc *.
PHILIPS ANUBIS
Deformed frame (not correct shape). Shorted deflector unit. * Jul 95 ctr *.
PHILIPS ANUBIS
Intermittently loses tune or (loop). Open 2260 capacitor or uncalibrated 5260 coil. ** . ic 7225 (tda8361), also does not work aft. * 13dec95 jpba *
PHILIPS ANUBIS
Loses memory while running. After a sudden loss of brightness, it goes to the initial channel, check micro ic 7600. * mar 95 ctr *.
PHILIPS ANUBIS
There are no colors Avoid yoke cable close to the crystals. * nov 95 jo *. trail open at jump 9694. * 10jan96 anc *. integrated 7255 (tda4461). * 11jan96 anc *. integrated 7225 (tda8361). * 12Feb96 anc *.
PHILIPS ANUBIS
There is no contrast Check open resistor 3460. * 21 Aug97 jpba *.
PHILIPS ANUBIS
Does not come out of intermittent stand by, or does not turn on. Check vo setting (95v), when high it triggers the circuit protection, see resistor 3561 (56e). * 10Sep96 anc *.
PHILIPS ANUBIS
Does not turn on via remote control. Diode 6618 (bzx79 9v1) leakage, only occurs with the on/off key, through the channels ok. * 26feb96 hbg *. see 7636 (bc548).
PHILIPS ANUBIS
It doesn't work (just screen with drizzle). Cristal 1630 (12mhz). * jul 95 anc *.
PHILIPS ANUBIS
It doesn't work (it stays off). Diode 6446 shorted, (output h). *set 94 egs*. resistor 3517, (3,3e), (power supply). * set 94 egs/ctr *. shorted 6441 diode (drive). * Dec 94 jdcc *. check vertical stage (1449/7400/6416/2414/mcss) if is closed, it causes the loss of c