Philips Repair Tips

Search: philips
Results: 14238

Make	Model	Symptom	Problem
PHILIPS	AK630	Squeaky sound	Integrated 7031. * mai 95 ctr *.
PHILIPS	AK630	Jumping track	Set to 118 7830/
PHILIPS	AK630	Loses reading with small touch.	Check cdm and integrated 7840. * 02dec96 esc *.
PHILIPS	AK630	Right channel doesn't work	Resistor 3872. * mai 95 ctr *.
PHILIPS	AK630	Doesn't read	Broken track on tda 8808 pin 20 and pin 28 track from tda 8809. * jul 95 esc . replace power supply diodes with possible intermittency. 10oct97 lt *.
PHILIPS	AK630	Doesn't open drawer	Resistor 3962. resistor 3949. * mai 95 ctr *.
PHILIPS	AK630	Focus does not adjust.	See track of pin 28 of the tda8809 and pin 20 of the tda8808. * Jul 95 esc *.
PHILIPS	AK630	Flashing display	Capacitor 2600. * mai 95 ctr . replace power supply diodes with possible intermittency. 10oct97 lt *.
PHILIPS	AK630	Display confuso	Verify 5851 resonator 8.46 mhz as cold solder. * Dec 94 eag *.
PHILIPS	AK630	Turn off inter. or protect (rew 3 for vcr).	Check diodes: 6600/01/02/03. * mai 95 ctr *.
PHILIPS	AK630	Damaging laser unit	Solder short between pins 24 and 25 of the tda8809 (7830). * sea 95 aac *.
PHILIPS	AK630	Turns off display after starting reading	7702
PHILIPS	AK603	Noisy or crunching sound	7870.** coil 5860. * mai 95 ctr . cdm unit. 09Oct96 aac *
PHILIPS	AK603	So fica em stand by (power off).	7840 uns8050 verificar data pino22 set 94 eag.
PHILIPS	AK603	No focus.	Check integrated: 7810, 7832 / capacitors: 2817, 2818 and also check the unit coil (open). may 95 acm
PHILIPS	AK603	Jumping track	2834/2833/ 3819/3820/ 7830/
PHILIPS	AK603	Doesn't spin disc	Cdm. integrated 7810. * mai 95 ctr *.
PHILIPS	AK603	Does not read after heating.	Check cdm unit. * 29Aug96 lt *.
PHILIPS	AK603	Doesn't read	5001. cdm 7810/7830. * conf. mai 95 ctr . with bad hf signal, broken track of 6843. mai 95 ctr *.
PHILIPS	AK603	Stand by led does not turn off. (device on)	7840.**