Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SANYO |
CTP 3766
|
Does not come out of standby | Q371, q372 and/or c382 | ||
| SANYO |
CTP3766
|
Dark dark image when turning on | Open r419 (120k) | ||
| SANYO |
CTP-3771
|
It doesn't come out of stand by, neither through the panel nor through the CR, just the pilot light on. | R520, r521, both 120k | ||
| SANYO |
CTP-6796
|
Tuning | R104-12k | ||
| SANYO |
CTP 6756
|
TV doesn't turn on | 120k supply resistor | ||
| SANYO |
CTP 6756
|
TV doesn't turn on | 120k supply resistor | ||
| SANYO |
CTP 6771
|
Open lines at the bottom of the screen and the image shakes | C451=470uf x 16v | ||
| SANYO |
CTP 6771
|
Open lines at the bottom of the screen and the image shakes | C451=470uf x 16v | ||
| SANYO |
C2997
|
Dated verti (increase screen) | L241 open | ||
| SANYO |
CTP 3766
|
Does not come out of standby | Q371, q372 and/or c382 | ||
| SANYO |
CTP3766
|
Dark dark image when turning on | Open r419 (120k) | ||
| SANYO |
CTP-3771
|
It doesn't come out of stand by, neither through the panel nor through the CR, just the pilot light on. | R520, r521, both 120k | ||
| SANYO |
CTP-6796
|
Tuning | R104-12k | ||
| SANYO |
CTP 6756
|
TV doesn't turn on | 120k supply resistor | ||
| SANYO |
CTP 6756
|
TV doesn't turn on | 120k supply resistor | ||
| SANYO |
CTP 6771
|
Open lines at the bottom of the screen and the image shakes | C451=470uf x 16v | ||
| SANYO |
CTP 6771
|
Open lines at the bottom of the screen and the image shakes | C451=470uf x 16v | ||
| SANYO |
VHR 14 - 15 16
CP 1 Sanyo |
CVBS signal output for scart without synchronisms | C1605 = 470 uf 16 volts | Sub c1605 = 470 μF | |
| SANYO |
C25 EG 35 N
EB2- A25 |
Falls into protection or turns on with low power and oscillates | D702 = 1n4148 with leak next to the ST/BY LED | Sub d 702 = 1n4148 | |
| SANYO |
CE20MTN4
PT90 |
Unlock | Enter code 23086 | The following default password 1234 |