Sanyo Repair Tips

Search: sanyo
Results: 852

Make	Model	Symptom	Problem	Solution	By
SANYO	DP50749 P50749-01 EAY58316301 EAY58316301	When turning on you hear a click and it turns off	Check and replace F801, Q801, Q802, IC801		AdamRep
SANYO	CE19LC95-C/P 17MB24H	Turns on tsound is sound but the image appears but disappears immediately	What is the cause and how to resolve the situation?		Maria da Conceição Simões Garrido
SANYO	50CE6139M1 55CE6139M1 UB9Z	When viewing 4k movies, the display has spots and an abnormal shape.	This problem is normally resolved by updating the firmware, check if the version is older than v8-ms918sy-lf1v022. update to v8-ms918sy-lf1v025		Andreas
SANYO	30CA1	Image flashes. backlight working.	The problem appears due to the change in the inverter's operating frequency. if jumpers j5, j8, j9, j10 are close together, the inverter frequency changes.	If j9 and j10 (close) replace to: j10 (open),(j9 (close); if j9(close) and j10 (open) replace to: j10 (open) j9 (open); if j9(open) and j10 (close) replace to: j10 (open) j9 (open); if j9(open) and j10 (open) replace to: j5 or j8 (close); (gnd)	Andreas
SANYO	CTP6791P	Image stretched at top and bottom with retraction lines at the bottom and image a little dark	C513 1u/50v looks good but it's not	Just replace	FÁBIO
SANYO	CTP3771 A3-D7SB	The image is not in color.	Furthermore, when the sound is good, no image appears	And when the image appears it is black and white	Sudam
SANYO	21CTX PT92 PT92	With sound, white screen but no image	Rd12 10Ω open due to tsl mat leaks	Replace tsl and rd12 of 200v line for rgb amplifier	Pedra
SANYO	CHASSIS CTP 3791 S	Vertical closed top and bottom	Cause capacitor c513 low capacitance		Eudes Viana
SANYO	EM 704 TGR EM 704 TGR	Beeping, cavity light and fan on directly, display with failing segments, does not obey commands	After checking, I condemned the microprocessor, but I decided to look more calmly, and raised the display to view the microprocessor tracks.	The glue used at the factory to fix the display shim oxidized the tracks around the computer and the display. very calmly and using fine threads, I retraced the tracks, scraping off the old glue. working 100%	Trendset
SANYO	RM-6100N	No sound in both am and fm	C705 1000uf shorted		Luciano Zica
SANYO	CTP3792	Vertical with 4 fingers closed at the bottom	R514 r515 open or altered 4.7k 2.7k 1/8w	Swap resolved	orlando lott
SANYO	CTP 3791	Turns on with closed vertical, and without sound.	Resolder the terminals of r101 and d666.	R101 and d666 with cold welding.	MARCONES DE ARARIPINA-PE
SANYO	CTP 3791	Turn on and off	Remove l807 from the board. It is close to the computer.	Remove l807	MARCONES DE ARARIPINA-PE
SANYO	CTP 3791	Turns on, but tsound is no image. tube off.	R481 open. tube filament cannon feeding.	Replace r481 0,15r	MARCONES DE ARARIPINA-PE
SANYO	CTP-3791	Stand by LED flickering and won't turn on	D-685 with leakage, replace this zener diode		ELETRONICA JUNIOR BELEM PARA
SANYO	CTP 6792	The normal image appears, but with a blue bar running downwards dividing the screen in the middle.	Ic271	Replace the IC271 LC89950 and the TV will work normally. God be praised!	Sinailson furtado
SANYO	CTP3791	Blue screen with no sound	R701 12k on kinescope board		Elias2305 TO.
SANYO	CTP-3781P	Tsound is no sound.	Open speaker.	Speaker replacement. resolved.	Turbinex
NOBLEX, SANYO, SANSEI, PHILCO	LCD32XH6, LCD42XF6, 32LC815H, PL3219 UH4B	It is detected that the LCD TV does not turn on, the red stby LED does not turn on. It is verified that the +5v power supply voltage of 5vstb is not present; and tsound is no oscillation in the primary of the supply on the ic1601 (fan7602p).	Diodo zener d1601 (33v 1/2w) na plaqueta da fuente.	Replace diode	Pablo
NOBLEX, SANYO, SANSEI, PHILCO	LCD32XH6, LCD42XF6, 32LC815H, PL3219 UH4B	It is detected that the LCD TV turns on for the first time, but then when you switch it to stby it does not turn on or turns on erratically.	It involves adding a 470Ω 1/4w resistor between jumpers j619 and jp671, on the power supply board.		Pablo