Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
SANYO |
C28SW3TX
PT90 ? |
Image. gear-shutter effect | Cp13 ... power supply | tvluso | |
SANYO |
CTP 3792
|
TV does not turn on LED is off and accumulating voltage in the power supply capacitor | Transistor q686 at the power supply, fully shorted | Replaced q686 tv is ok | afonso, taquari eletronica |
SANYO |
CTP6791P
|
Poor color and purple line in the vertical direction. | Ic 271 lc89950 replace | @gepê | |
SANYO |
CTP6791P
|
Hoarse sound | F641 changed (replace) also check the sound filter 4.5 | @gepê | |
SANYO |
CTP6791P
|
Vertical reduced at the bottom and stretched at the top | C513 1mx50v replace | @gepê | |
SANYO |
CTP6791P
|
Vertical closed | R516 open (change) | @gepê | |
SANYO |
CTP6791-P
|
Dark colored stain on the screen | I exited the focus socket defect screen | MARCOS DE UBATUBA | |
SANYO |
CTP3791S
LA3- A14F3ABS |
No sound and no noise at all | Output la4285 and open coil f641 | When changing it, the sound didn't come out because the 16v power supply was missing and one coil was open. Checking the other outlet, I found that it was really bad. | serginhosond@yahoo |
SANYO |
33LJ/29LH43
|
Osd ñ it seems | R 544 de27k next to the 39k resistor that feeds the varicap's 33v. | Noun. the same | @gepê |
SANYO |
6791P
|
High power supply | Diode 614 defect resolved | sinezio libano
|
|
SANYO |
CTP 6791
|
Does not turn on, completely dead power supply | R 620 and r 621 both 120k open | After the replacement, the TV worked normally | CARLOS |
SANYO |
CTP6781T
|
Shaking image | Cap 103k, localizado no pino 3 do ic 451(c454) | Replace c454 | fernandocamarques |
SANYO |
CE28SW4 PT90
PT90 |
Extremely high screen voltage, cannot be adjusted on the transformer | Rd008 open and icv2 short | Replace rd008 10r, and icv2 stv5112, and check diode dd05 | |
SANYO |
CE28SW4
PT90A |
Extremely high screen voltage, cannot be adjusted on the transformer | Rd008 open and icv2 short | Replace rd008 10r, and icv2 stv5112, and check diode dd05 | |
SANYO |
C-3792
|
Time it turns on time it doesn't turn on when it turns on it turns off and stays in stand bay | Cold welding on fly back and baffle | Resolder | eletroclaudio aguas belas |
SANYO |
C-3792
|
TV. michida .white screen no video | Tripote vf191agc and o sw191 service----- normal | Regulates agc and the service key turns to normal | eletroclaudio aguas belas |
SANYO |
CE14J1
2100 |
Does not turn on LED always blinks | R718 (3m3) no circuito vert.ramp (ic400) | Replace resistance | MeA |
SANYO |
CTP 3791P
|
When it arrived, the 432 was shorted, I put another one in and poof | I found c. 445 with loose solder did not turn on | Okay, the x.361 also had a broken solder, ok, it started working normally | gbs.eletronica Recife |
SANYO |
CTP 6791
|
Doesn't start | The fountain goes up and down normally but the horizontal does not oscillate | Cristal x 361 | FERNANDO S |
SANYO |
C20MNTX
PT90 |
Starts up and goes down instantly | Cd03 open | David Honorio |