Sanyo Repair Tips
Search: sanyo
Results: 852
Results: 852
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SANYO |
CTP-6796P
|
White screen or with return lines | Q261 (a1015) | ||
| SANYO |
CTP-3780
|
Dead | C314 | ||
| SANYO |
CTP-3781P
|
Drizzling doesn't enter the canals | Qaq refused. | ||
| SANYO |
CTP-6766
|
No image clear screen | R-454 ( 1k8 ) | ||
| SANYO |
C29LH43B
|
Does not tune in to any channel, zero voltage (33v) | R103 de 39k 1/or | ||
| SANYO |
C29LH43B
|
Only tune in to channel 02. | Leak between pin tu and varicap ground | Clear the track or put a jumper | |
| SANYO |
C29LH43B
|
Is stuck in demo mode (demonstration) | Press the menu key for 5 seconds and that's it | ||
| SANYO |
CTP 4751
|
Cai o horizontal | C419 (.01) ceramic | ||
| SANYO |
CTP-6792
|
White image with return | Q261 | ||
| SANYO |
CTP-4751
|
Inoperative - voltages present at the power supply, but do not oscillate. | R 302 (120k) open | ||
| SANYO |
CTP-3755
|
Slowly closes the vertical after a few minutes | C458 4.7mf/35v | ||
| SANYO |
CTP-3755
|
No Sound | C153 100mf/25v e c156 1mf/25v | ||
| SANYO |
CTP-6751
|
Does not tune channels | C128 10nf/63v with leakage on pin 13 of ic101(la7520) | ||
| SANYO |
CTP-6751
|
Aft does not act | C127 10nf/63v short, connected to t104 (AFT coil) | ||
| SANYO |
CTP-3781P
|
Burning out of the horizontal outlet after a few weeks or months of normal operation | Diode d793 1n4148 connected to protective mesh | ||
| SANYO |
CTP-3771
|
Doesn't start | R320 e r321 | ||
| SANYO |
CTP-6781
|
Normal sound and hv, but without video - white image | D242 1n4148 | ||
| SANYO |
CTP-6791
|
No Sound | Smd r131 e c131 | ||
| SANYO |
CTP 3792
|
Vertical blue stripe 10cm wide, blurred colors | Change ci lc89950 ic271 and r273 82k changed. | ||
| SANYO |
3781P
|
Does not turn on, normal power supply primary | D 316, open |