Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV21R1E -BE5
|
Does not light up, blinks 10 times | Transfer. hr7762 lines | ||
| SONY |
KV-E2943E
|
Tries to start but reverts to st/by, led b flashes 3 times | Line transformer with internal leakage | ||
| SONY |
KV-E2943E
|
Does not start, led b flashes 13 times | R681 open | ||
| SONY |
KV-M2100
|
Image out of phase horizontally | Resistor 822 (smd) open | ||
| SONY |
KV-14ME1 CHASSIS BE-4A
|
Low sound and flaws | Substituir d408 (zener 6v8) | ||
| SONY |
KV-29X5E
|
LED flashes 4 times | T 511 (line transfer faulty) | ||
| SONY |
KV-25FX30E FE-2
|
Off - error code 11 volts (jungle controller 8 volts error) | Hz pot trs - bu2515dx shorted, power supply went into protection without having secondaries, therefore there is also no 8v | ||
| SONY |
KV-14LM1 FE-2
|
Excess tension | Ver r637 | ||
| SONY |
KV-X2973
|
LED flashes 13 times | R854 next to the trans. of lines | ||
| SONY |
KV-25X5E
|
4 winks | Substituir ic vertical stv9379 | ||
| SONY |
KV-14M1E
|
No line signal on the driver, LED flashes 4 times. | Line oscillator operating out of frequency. replace ic m44007p | ||
| SONY |
KV-14TE1 CHASSIS BE-4
|
Diverts the tuning voltage | Remove the black plastic that is between the pins and the metal box of the tuner. | ||
| SONY |
KV-14M1
|
Image shifted laterally (out of phase) | Let 10 (1SS133T-77) | ||
| SONY |
KV-21X5E
|
No image or interruption has osd | Q101 = bc858 | ||
| SONY |
KV-14LM1
|
5 blinkers | R618 - 270k | ||
| SONY |
KV-M2521D
|
The line output transistor was very hot and the image was a little closed horizontally | R822 from 1k/1w changed to 11k. | ||
| SONY |
KV-14LT1E
|
Misadjusted geometry and no sound. | On channel 59 open service menu and restart nvm with tt41. If necessary, make other adjustments in the service menu. | ||
| SONY |
KV-M1420 - CHASSIS BE-2A
|
G2 high - voltage +190v on the cnc74 trc plug with the same value as the g2 trc input (pin 9) | Open 27Ω r723 | ||
| SONY |
KV-M2100E
BE2A |
Wide horizontal, it is not possible to make the correction and with the effect )( | R804 (smd) with cold solders, located next to the flyback | jvidal | |
| SONY |
KV2160B
|
LED flashing and sound ok, screen dark | Ic 682, regulator of 9 volts ruim. |