Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDX7580
|
Ejects disc prematurely (unit mounted at 45 degree angle) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. intermittently it will eject or nottake a disc. are there restrictions on the angle of installation? wouldheat from the transmission cause the unit to eje | ||
| SONY |
CDX7560
|
Ejects disc prematurely (unit mounted at 45 degree angle) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. intermittently it will eject or nottake a disc. are there restrictions on the angle of installation? wouldheat from the transmission cause the unit to eje | ||
| SONY |
CDX7540
|
Ejects disc prematurely (unit mounted at 45 degree angle) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. intermittently it will eject or nottake a disc. are there restrictions on the angle of installation? wouldheat from the transmission cause the unit to eje | ||
| SONY |
CDX7520
|
Ejects disc prematurely (unit mounted at 45 degree angle) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. intermittently it will eject or nottake a disc. are there restrictions on the angle of installation? wouldheat from the transmission cause the unit to eje | ||
| SONY |
CDX5040
|
Ejects disc prematurely (unit mounted at 45 degree angle) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. intermittently it will eject or nottake a disc. are there restrictions on the angle of installation? wouldheat from the transmission cause the unit to eje | ||
| SONY |
XRU220
|
No audio, other functions o.k. (q-108 defective) | Unit would power up, display would be on but no audio. | ||
| SONY |
CDPC215
|
Various problems (reset not working) flex cable ref. 101 bad | This unit would manifest a variety of odd problems, includingno play. noticed that reset on ic-202 was not going to 0v as required.it stayed at around 3v. found a break in the ground lead of flexconnector between main and bd board. this robbed the bd | ||
| SONY |
CDPC211
|
Various problems (reset not working) flex cable ref. 101 bad | This unit would manifest a variety of odd problems, includingno play. noticed that reset on ic-202 was not going to 0v as required.it stayed at around 3v. found a break in the ground lead of flexconnector between main and bd board. this robbed the bd | ||
| SONY |
ICF2011
|
Low sensitivity on am and short wave - resolder vr-1 | Low sensitivity on short wave and am. found cold solder jointon vr-1 pot, the am rf gain control. | ||
| SONY |
ICF2010
|
Compatibility problem ic-504 | The ic-504 is a surface mount ic type. the part number is8-759-240-13. the computer substitutes to part number 8-759-205-76, whichis a dip type ic. physical size is not compatible. -hq comments: kcp corrected the sub. 8-759-240-13 now subs correctly t | ||
| SONY |
CDPC221
|
Newer units have different loading gear screw, 7-682-661-09 | Newer production units have a different screw for securing thea loading gear (ref. 112). the original screw is a step screw whichserves as the shaft for the gear the newer units have a machine screwwhich secures the gear to a brass post which is secured | ||
| SONY |
ICF2010
|
Keyboard locks up - cleaned 0 button | Intermittently the frequency entry keys are no longerfunctioning. | ||
| SONY |
SLVR5UC
|
Poor picture with fuji tape in ep - adjust rv201 rp-76board | In super vhs the recording in ep mode using fuji tape inplayback was weak and streaky. on sony tape there was no problem. | ||
| SONY |
GVS50
|
Rf adapter does not work - replace ps402 au136 board | The rf adapter does not work. | ||
| SONY |
CCDTR31
|
Intermittent solarization/ic-801, vc-122 | Camera has intermittent solarization on/off. vtr mode is ok. | ||
| SONY |
CDXA55RF
|
Excessive skipping (broken spring, reference #7) | Complaint is excessive skipping. the chassis was rattlingloose inside case. found spring broken on optic side of chassis and bothdampers ruptured. | ||
| SONY |
SLV575HF
|
Popping noise after heat up: replace ic-007 hf-9 board | After the unit heats up, there is popping noise in the audio.if the playing tape has mono audio, the video disappears completely. | ||
| SONY |
SLV585HF
|
Vertical bar distortion: replace the full erase head | Vertical bar distortion on the video picture. | ||
| SONY |
XR5450
|
No audio from tape (r-414 on eq board open) | No audio from tape, but radio portion had audio. found b+not present at pin 8 on ic-401, however, b+ was present at pin 7 ofcnp-102. found r-414 10Ω resister open. | ||
| SONY |
TCC5
|
Door will not stay closed - ref 103 out of position | When you close the door, it will only close to the firstposition, the position where you can skip tapes with door closed. afterfive seconds, the door reopens. |