☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY CDPC75ES
Audio mutes after unit warms up
SONY CDPC75ES
Audio mutes after unit warms up No audio after unit warms up (disc plays ok & display normal).
SONY CDP350
Replacement diode is the wrong size The part number 8-719-940-76 155132 crosses in system to partnumber 8-719-107-94 which is a chip component. the original is availableas lead standard diode. -hq comments: thanks for pointing out the error to us. according to the1993 semiconductor repla
SONY WMD6C
Availability of meter knob Peak/battery switch cover is no longer available. this unit,however, is still in production. -hq comments: kcps had bad sub corrected. please reorder.
SONY ITA305
Size of rpl speaker Replacement speaker is too large to fit in the unit. theoverall diameter is ok. the magnet diameter is twice the size of theoriginal. -hq comments: kcp checked with tokyo for magnet size, which should be5.7cm. magnet size of kcp inventory are also 5.7
SONY CCDFX410
Availability of fp-442 flex board We are getting many requests from the field for the partnumber for the fp-442 flexible board. is this part available? -hq comments: this part is listed in the ccd-fx620 service manual page163. part number is 1-641-639-13.
SONY CFD767
Cd drawer will not open The cd drawer will not open even after the 10 second delay.i found that one or both of the wires (ref. no. 615 and 616) that connectthe inductors (l-701 and l-702) to the translation board (ref. no. 651)are not connected. closer examination showed that
SONY CFD757
Cd drawer will not open The cd drawer will not open even after the 10 second delay.i found that one or both of the wires (ref. no. 615 and 616) that connectthe inductors (l-701 and l-702) to the translation board (ref. no. 651)are not connected. closer examination showed that
SONY CFD765
Both decks running at high speed Both motors were running in high speed. i found a residual1.5v on the base of q-334 (0v expected). after eliminating all possiblepower supplys found that only by disconnecting the base of q-312 (mic/mute) the0v is restored on the base of q-334. found 6v on a
SONY CMH1K
The unit does not turn on The unit does not turn on.
SONY CMH1K
Keypad is not working properly The right hand side column of keys (which includes end, clr,3, 6, 9 and #) was not active.
SONY TADL100
No rmr input No rmr input control. i have two units with the same problem.
SONY SPPA60
No mechanical motion Unit did not have any mechanical motion at all. also pertainsto serial number 32407.
SONY SPPA60
Distorted audio Unit had distorted audio. traced problem to handset. alsoapplies to serial number 20376.
SONY SPP57
No power handset Handset did not have power. troubleshooting found no reset onic-501/pin 44. also pertains to serial number 82634.
SONY SPP57
No audio onto handset speaker Unit had no sound out of handset speaker. speakerΩed at500kΩ. also applies to serial number 31698.
SONY FDL380
Legs on vr-303 and 304 are reversed, see correction # 1 Part received by servicer has legs reversed on it. center legis toward adjustment side of vr and should be away from it. the reverseholds true for two outside legs. -hq comments: service manual correction # 1 covers this problem.ref. in
SONY UP850N
Won't print picture Does not print the picture. when switched to negativepicture, prints were solid black with no picture.
SONY XVC900
Fader does not work Fader not working and unable to record incoming video.background is on all of the time.
SONY LBTD117CD
Cd door doesn't open/close; sled doesn't move Cd door will not open or close nor will sled operate. thereis +7v present at cn-101 but not at ic-103 or ic-102.