Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV32XBR15
|
Intermittent horizontal shift to right, re-soldered ic-582 | Intermittent picture is shifted to the right - no color anddark. when you turn the set on and off, unit will work ok. | ||
| SONY |
KV2090R
|
Raster with distorted sound, resolder a-1 connector | Distorted sound, no picture, no snow plain raster only. | ||
| SONY |
CCDV9
|
Dead unit | Unit dead and no display. when lithium battery is taken out,display comes on. when its put back in, the unit dies again. | ||
| SONY |
CDX7580
|
Illumination weak/won't switch colors | Display won't switch color or display is dim. | ||
| SONY |
SLV575UC
|
Timer record lock up | Customer sets up timer record program 1 to start at (forexample) 8:00 a.m. switch-off at 8:30 a.m. program 2 starts 9:00 a.m.switch-off 9:30 a.m. at 8:00 a.m. unit starts to record, but powerfailure occurs at 8:10 a.m. power returns at 8:40 a.m. cus | ||
| SONY |
CDPC305
|
Static in output when unit has warmed up | Static in output which increases as the unit (ic) heats up.this is the second encounter of this type in recent weeks. | ||
| SONY |
ACV30
|
Availability of ch board | Reference fpr #lo244. the disclaimer no authorizationrequired has not yet been attached to part no. a-4925-307-a in thecomputer so our parts distributors are still rejecting orders for thispart. -hq comments: all semiconductors are now available for the | ||
| SONY |
D4
|
Defective part - upper lid assembly | When replacing upper lid assembly, i found the magnet in thechuck plate assembly on the wrong side. there was no magnetic chucking tospindle motor. | ||
| SONY |
SPP150
|
No activation during battery save | Unit works in normal mode but will not activate channelscanning in batt save mode. | ||
| SONY |
SPP110
|
No activation during battery save | Unit works in normal mode but will not activate channelscanning in batt save mode. | ||
| SONY |
SPP300
|
Handset does not communicate with base | Cordless handset had low b+ to pll. only 1.2 volts on q-210collector. | ||
| SONY |
SPP100
|
Handset does not communicate with base | Cordless handset has low b+ to pll. only 1.2 volts on a-210 collector. | ||
| SONY |
KV27XBR50
|
No sound on front channel, replaced ic2451 and ps-2401 | No sound on front channel. | ||
| SONY |
CCDV5000
|
Not showing when battery is low | I supplied an externally regulated dc power supply with unitin record, standby, i lowered the dc supply from 6.3v down to 5.5v. thebattery down indicator did not come on at all on the lcd or monitor. | ||
| SONY |
CDPC35
|
Incorrect part number in part list - q-604 | Q-604 is listed in the parts list as a dta144es part number8-729-900-65. this is erroneous. it is a dtc114es p/n 8-729-900-80. -hq comments: thanks for the info. | ||
| SONY |
CPD1320
|
Curvature of the crt | What is the curvature of the crt? -hq comments: the radius of curvature of the crt is: side to side r =660mm. diagonally r = 1015mm. | ||
| SONY |
CPD1303
|
Curvature of the crt | What is the curvature of the crt? -hq comments: radius of the curvature for the crt is: side to sider = 660mm. top to bottom = flat (infinity). corner to corner r = 1015mm. | ||
| SONY |
CPD1302
|
Curvature of crt | What is the radius of curvature for the crt? -hq comments: side to side r = 660mm. top to bottom = flat (infinity).diagonally r = 1015mm. | ||
| SONY |
SLV272UC
|
No video in playback or tuner | No video at all, no playback and no tuner or on screen displayvideo. | ||
| SONY |
CVPG500
|
Paper jams after printing | The delivery arm assembly jams causing the printed paper jamsin the print delivery area. |