Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
SLV757UC
|
Checking timer settings | We do not have an operation manual. how does the customercheck this timer - activated recording settings: -hq comments: please have customer check page 49 of the owners manual. | ||
| SONY |
AC40A
|
Ac-40a ac adaptor is no longer available | The ac adaptor, ac-40a, is no longer available. this adaptorwas 6v at 800ma. what is a suitable replacement ac adaptor? -hq comments: please use the ac-d468 as a replacement. the ac-d468 isswitchable 6, 9, 12v at up to 800ma. | ||
| SONY |
FD40A
|
Ac-40a ac adaptor is no longer available, use ac-d468 | The ac adaptor, ac-40a, is no longer available. this adaptorwas 6v at 800ma. what is a suitable replacement ac adaptor? -hq comments: please use the ac-d468 as a replacement. the ac-d468 isswitchable 6, 9, 12v at up to 800ma. | ||
| SONY |
CCDV220
|
Video edit | There seems to be some confusion with our dealers on whetherthis unit does a video insert without erasing the pcm track. -hq comments: no, an audio dub may be done after recording video, but avideo dub is not possible. | ||
| SONY |
KPR4620
|
No dc voltages listed on (c) mounted boards, voltages below | Service manual does not show any voltages for crt sockets.what should voltage be? a k b g1 - grid c g2 - screen d g4 - focus -hq comments: we are checking the voltages with our lab | ||
| SONY |
D25
|
Spinning and then stops | Missing 6v.x-601 does not oscillate. | ||
| SONY |
SPPS10
|
Low volume in handset speaker | Low vol-hndset spkr vol cntl does not incrse it-even on high. | ||
| SONY |
XR900
|
Part number for buttons | There is no part number for the time signal button or thedisplay button in the service manual. | ||
| SONY |
KV25XBR
|
Mistake in service manual | Missing line in service manual on (d) board. -hq comments: the line is missing connecting t-601/primary (downside) tojoint point of rl-601/c621. a service bulletin will be issued on this. | ||
| SONY |
KV1958R
|
Vertical retrace lines on top of picture, c-515 open | Lines on top of picture fold over. -hq comments: c-515 was open. | ||
| SONY |
KV1957R
|
Vertical retrace lines on top of picture, c-515 open | Lines on top of picture fold over. -hq comments: c-515 was open. | ||
| SONY |
EVS900
|
Can audio be dubbed on tape before video | Can an audio track be laid down before the video track? -hq comments: no this cannot be done, the audio must be dubbed after thevideo. | ||
| SONY |
CCDV11
|
Part number for flex connector | Do you have a part number for the 39 pin flexible connectorfrom the (ss-82) board to the (va-37) board? -hq comments: the part number is 1-574-125-11. | ||
| SONY |
EDV9500
|
Unit exibits over-modulation in ed-beta mode | When playing back an ed-beta tape, it looks as if its a superbeta machine. this is the over-modulation that we are experiencing. doyou have any solution for this problem? -hq comments: the unit appears to be locked in normal beta mode. pleasecheck ed | ||
| SONY |
SRFM40W
|
Fm tuning range | If the unit is used in the fm mode, it will only tune from76.0mhz to 90.0mhz. am works ok. | ||
| SONY |
KPR46DX10
|
Casters, p/n below | Part number for casters is not listed in the service manual. -hq comments: there are two types of casters. there is no infomation as to when the casters were changed to the new type.old part numbers - new part numbers4-390-606-01 | ||
| SONY |
KPR46CX10
|
Caster part number missing from sm.,see p/n list below | Part number for casters are not listed in the service manual. -hq comments: there are two types of casters. there is no infomation asto when they were switched to the new type.old part numbers - new part numbers4-390-606-01 caster | ||
| SONY |
STRAV1010
|
Part number for top cabinet strav910/1010 | Part number is missing from manual/retrieved from tokyo. thepart number is 4-925-039-11. | ||
| SONY |
STRAV910
|
Part number for top cabinet strav910/1010 | Part number is missing from manual/retrieved from tokyo. thepart number is 4-925-039-11. | ||
| SONY |
KV27SXR10
|
Time clock too fast, see sb tvp0087r1 | The time clock advances 12 minutes every hour. this indicates the microprocessor ic-101 is set to 50hz. -hq comments: this problem is caused by 50/60hz misdetection. please add a 0.1uf/50v cap between the base of q105 and grou |