Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV1976R
|
No video, replace ic301 | No video, audio has power. | ||
| SONY |
CDP302
|
Alignment problem | Skipping-changed bu-1a will not read toc rf pll alignment good, but not stable changed ic305 no change. | ||
| SONY |
TCFX4
|
Part # for switch assy | I need the part number for the switch assy s801-s807.these are the function switches. -hq comments: function button assy is ref. #65 on page 31 of the s/m.p/n is a-2145-043-a. | ||
| SONY |
CDP30
|
Lens change, see service bulletin # 0310 | Production change. this unit has new type optical assy kss-120c (p/n x-4910-441-1). there is no supplement or s/b on this change oncdp-30. cdp-70 has a supplement to the s/m describing changes. svcr.states that there are some changes to pc board also | ||
| SONY |
SLHFR70
|
Part number | What is the part number of ps2.6x4 screw and the spring pin2.5x16 on page 88 of the s/m. -hq comments: the p/n of the screw is in the hardware list on page 92(7-628-235-95). the pin is not available. however, a 2.5x14 pin shouldwork (p/n 7-626-302-31) | ||
| SONY |
BMC550
|
Distortion in upper and lower portion of picture | Upper and lower portion of picture was distorted only during a short period of time after standby to rec or rec pause to rest. after this point, playback picture appears normal. | ||
| SONY |
BMC110
|
Unit dead, no power up | Unit was completely dead, no operation. found u-comp of ss-17board (ic301) pin 38 (reset) always remains low. | ||
| SONY |
KV25DXR
|
Intermittent horizontal squeal | This unit has an intermittent horizontal squeal. | ||
| SONY |
KV1993R
|
The aux would come on in front of the channel number | This set displayed the same symptom as the kv-1970r. the auxwould come on in front of the channel number. this model number is notlisted on the bulletin. | ||
| SONY |
CDX5
|
Protector plate and frame part # | The original frame has notches in the side so the protectorkit 3-323-287-01 can be snapped on. the replacement frame part does nothave these notches. | ||
| SONY |
ALL CAM
|
No 80 pin ic remover & no part number | Video equipment now has 80 pin flat pack ic | ||
| SONY |
WMF75
|
Part number missing | Page 5 of s/m sony bond sc-108, no. 9 digit part number given. | ||
| SONY |
SLHF600
|
Video noise | Units displayed white video noise, resembling static, duringplayback. | ||
| SONY |
KV3000R
|
Dead unit | Dead. f604 was opened. | ||
| SONY |
KV2680R
|
Sound fm r speaker is much louder than l sp, resolder c-1190 | Sound from right speaker is much louder than left speaker. | ||
| SONY |
KV20XBR
|
Dead unit | Dead. f601 was opened. | ||
| SONY |
KV3000R
|
Unit was dead | Dead. f601 was opened. | ||
| SONY |
D7
|
Distortion in headphone | Only headphones are distorted (intermittent). | ||
| SONY |
BMC550
|
No auto focus | Unit came in with complaint of no auto focus. after extensiveelectronic troubleshooting and adjustments i noticed that the push rodthat is activated by the lens barrel to give mechanical reference to theinfrared transmitter did not move when lens moved. | ||
| SONY |
SL9090
|
No unloading or loading | Unit came in with cassette stuck inside. manually removedtape, but unit would not load or unload. |