Search: toshiba
Results: 5592
Make Model Symptom Problem Solution By
TOSHIBA 2922IFS
Vertical line and then off R-310 open jose ap da silva
TOSHIBA U13
Power supply beeping, with normal image Changed 680r resistor r876 EDILSON
SEMP TOSHIBA TVC147
Dz 819 dz 810 shorted dino cesar
SEMP TOSHIBA TV2958GFS
Vertical closed 5 seconds turns off D301 open dino cesar
SEMP TOSHIBA TV2070
High power supply R 824 15k open dino cesar
TOSHIBA TV 2089 -U13
Without horizontal and vertical synchronization Ci dirty handyman Cleaning ci solves the problem MARCUS ADRIANO
TOSHIBA U14 TV 2090 1490
Heats and burns horizontal outlet C419 47/50v Note: you have to replace it, there is no point measuring with a capacimeter This email address is being protected from spambots. You need JavaScript enabled to view it.
TOSHIBA 1492 LAV
U16
Horizontal output shorted, Change c 440 open LUIZTVSOM
SEMP TOSHIBA TV2051
U18
Horizontal exit burning Electrolytic capacitor c419 47uf/63 replace with 100uf/63v eletronica fernandes
TOSHIBA TV2083FAV
U11
Lack of contrast/dark image, the image could only be seen with the lights off, windows and closed doors. Abl circuit that comes out of pin 8 of the tsh t461 Measuring voltage on pin 28 of the tb1238n processor I found -3v it would have to be +3 to 6v checking I found that a r smd :r227 was open I added another with the same value (39k) problem solved elizeu nunes da silva
TOSHIBA TV2999KMS
LEM,6 LEM,5 LEM,7
Dark image Capacitor replacement, c902 RONALDO ANDRADE
TOSHIBA 2982 MAV
LEM 9
There is no image or sound on the TV, only audio and video Change 24wc16 memory problem solved branco billy
TOSHIBA TV-2986S-2996S
Hissing sound in stand-by C 819 of 47mf sold out Noise from the speakers in stand-by and the 126v +b power supply with the same values ​​when turned on, should be 71v, RENABETU
TOSHIBA 2083
U-8
Does not turn on and cutting power supply C167,c182,c524,c224,c225,c301,c877,d161e d501 wagner
TOSHIBA TV2157 AFS
Completely dark screen C 902 do (g2) endrew
TOSHIBA TV2157NFS
U18
With the rocky sound Unsolder the base of que.6 11 and que.631 julio itaguai
TOSHIBA 1491
U 14R
LED does not light up, does not turn off via the control, the +b of the power supply screen is off when increasing the escrem of the fyay back you notice the reduced frame. Power supply resistor Replace resirtor840 fernandoferreira
TOSHIBA 2999
LEM 7
Strong hissing at the power supply, Changed resistors smd in the power supply r863 and 876r josuel
TOSHIBA STV 9302 A
Closed vertical, bottom. Solda fria no r 421, 15Ω. Resolve JESPA
TOSHIBA 28N04N
CUC2032
Dead Leaky t60006 insulation Replace insulation CarlosVale