Repair Tips

Search:
Results: 87717

Make	Model	Symptom	Problem
SONY	KV2680R	No pix, no sound, leaky c-104 replaced	Unit when turned on would come up with high voltage but nosound, no picture and no control from front panel of any function. foundc104 reading 150Ω on pin 15 of ic105. this capacitor caused no mclock on pin 25 of ic103.
SONY	CFS5000	Wrong p/n	No such part number (a-3247-124-a) and cfs-5000 has 2 colors. holder, cassette (gray) x-3321-505-1 holder, cassette (gold) x-3321-505-2 -hq comments: we will issue a s/b.
SONY	D5	No power	Unit had no power.
SONY	CCDV8	No e to e	No blanking.
SONY	CCDV8	No eject	No mode power dc.
SONY	CCDV8	Beta scan noise	Beta scan damaged tape.
SONY	TV520	Different pinout	Substitute picture tube has different pinout than originalone. kc says that this is a good sub but a bulletin was issued on howto rewire set, i can find no record of it. -hq comments: we will investigate this problem and if necessary, issuea t/n and s/
SONY	SPP11	Noise in handset	Hand set would make all kind of noises. when power was firstturned on, it would dial one digit.
SONY	SL10	Noisy special effects in beta ii	Beta ii pause, betascan and beta skipscan is noisy anddifficult to watch. -hq comments: this is normal operation for the sl-10 in beta ii opera-tion. this model does not have the required 1/2h delay line or the jogprocess ic which is used for error fre
SONY	CFS5000	Incorrect p/n - band select switch	Part number ordered is also stamped on part received. partordered is two position switch approx. 1 1/2 inches long with 8 pins inmiddle, part received is approx. 2 inches long with 16 pins along entirelength. we think part number in the manual is wrong
SONY	CCDV8	Drum was not starting	Drum was not starting.
SONY	CDP200	Chucking arm ass'y	Chucking arm seems to be the biggest problem on this model.can the arm assembly be updated to the magnet type used in cdp-302? fscshave chronic complaints and no positive solution. -hq comments: the cdp-200 has no magnetic type arm assy. to correct th
SONY	CDP70	No sled operation	Sled motor would not run.
SONY	CDP520ES	Skips backwards near end of disk	On last selection, sled jumps backwards.
SONY	SL2500	Full erase head on at all times	No playback except for the first few sec. counter works for5 sec then stops as picture disappears. found no video/audio or ctl afterrewinding and tried to play it. power was already on and erasing tape.
SONY	WM16	Audio is distorted - tape speed too fast	Motor control board cracks when bottom case is put on unit.this causes motor to run too fast.
SONY	SL2710	Clogged head	Repetitive clogging, then one head dead.
SONY	CFS950	Problem with cassette loading	A sony lnx90 cassette would not load properly. the tape wouldblock the head and pinch roller from engaging.
SONY	SPP22	Cannot talk out	All functions were normal except talking from hand unit, the other person could not hear.
SONY	SPP22	No function	No function at all.