☰

Grundig Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: Grundig
Results: 948
Make Model Symptom Problem Solution By
GRUNDIG CUC2131
No power R60502 (3mΩ 2watt) open circuit
GRUNDIG CUC2080
Turns on but goes to sb after a second Tda8350q + r54012 1Ω +r50011 33Ω.
GRUNDIG CUC2080
No power Irfpc50 s/c and 270k (connected to pin 2 of tda5605-3
GRUNDIG CUC2059
Dead - chopper tr t60006 blown
GRUNDIG CUC2058
St/by only Tripler - cheaper from cpc
GRUNDIG CUC2058
No sound/pic - could be int O/c print under small vert panel with 10 pins behind tuner
GRUNDIG CUC2058
No sound Both audio o/p ic`s tda7265 & 2.5a wickman fuse o/c
GRUNDIG CUC2058
Dead with blackened fuse P. supply fet irfpc50 was s/c due to 270k res in psu o/c, also replaced tda4605-3 as a precaution
GRUNDIG CUC2058
Dead Tda4605, 270k 1/2w res & chopper fet irfpc50 (used 2sk2078 in lieu) - all in psu
GRUNDIG CUC2040
Tripping Loptx (29221-029.52a) s/c, seme hr6574 15.42 ukp.
GRUNDIG CUC2032
Dead Buz90 smps t60006 s/c & fuse si60001 1.6s o/c - caused by r60001 270k & r60007 120k hi res also tda4605-3
GRUNDIG CUC2031
Set jumps from chan 1 to av3 int on its own Check for arcing loptx
GRUNDIG CUC2030
Parental lock Hold the vol+ button on the remote and switch on the tv via the on/ off switch.this results in the language menu coming up. if you then press ok the set goes straight to auto tune mode. if you then press text this stops auto tune and allows you access to all menus.entering the code 7038 cancels lock
GRUNDIG CUC2030
Menu access & child lock Hold the vol+ button on the remote and switch on the tv via the on/ off switch.this results in the language menu coming up. if you then press ok the set goes straight to auto tune mode. if you then press text this stops auto tune and allows you access to all menus.entering the code 7038 cancels lock?
GRUNDIG CUC2030
Line collapse Dry joint scan coil plug & r55006 5r6 1/2w o/c causing no e-w
GRUNDIG CUC2030
Hotel mode disabling Sw set off at main sw. press "i" button & sw on. in service menu change hotel to "off"
GRUNDIG CUC2030
Hor black & white lines & no tuning Sound msp chip faulty - causing corruption to data lines
GRUNDIG CUC2030
E/w poor Tda8350 fop chip
GRUNDIG CUC2000
Line collapse Could be o/c winding n & l on ipsalo tfmr
GRUNDIG CUC20/30
Blue screen only Dry joints ic61050, ic61060, & ic61040 regs