Grundig Repair Tips
Search: Grundig
Results: 948
Results: 948
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| GRUNDIG |
CUC1882
|
Eht comes up at sw on then reverts to st/by | Dry joint at fop scan coil plug in middle of pcb | ||
| GRUNDIG |
CUC1842
|
Focus poor | Replaced tripler & 2 x 1n5 6kv caps on dynamic focus board | ||
| GRUNDIG |
CUC1822
|
Hor dashed magenta lines superimposed on pic | Check for dry joints/elect caps in "feature" box | ||
| GRUNDIG |
CUC120
|
Startup - takes a long time to come on. | C626 reservoir cap. | ||
| GRUNDIG |
CUC120
|
Startup - no start up. | Ic tda4600 plus check drys on l631 off base of chopper tx. | ||
| GRUNDIG |
CUC120
|
No sound | C2408 1000µ s/c; r2408 o/c 3r9 on audio board | ||
| GRUNDIG |
CUC120
|
No picture - eht & sound ok. | D2764 ( ske2f1 ) o/c. | ||
| GRUNDIG |
CUC120
|
No luminace. | D2536 ( in4148 ) leaky. | ||
| GRUNDIG |
CUC120
|
No cold start | C626 reservoir cap o/c | ||
| GRUNDIG |
CUC120
|
Lack of frame at bottom when cold. | C2768 ( 100uf ) on deflection pcb. | ||
| GRUNDIG |
CUC120
|
Intermittent shut down. | Ic tda4600 plus check drys on l631 off base of chopper tx. | ||
| GRUNDIG |
CUC120
|
Intermittent shut down. | Dry joints on l631 off base of chopper tx. | ||
| GRUNDIG |
CUC120
|
Intermittent going into standby. | Change r647 to ceramic. | ||
| GRUNDIG |
CUC120
|
Interference at sides. | Ic tda2595 sync/line osc ic. | ||
| GRUNDIG |
CUC120
|
Int luminance | C2527 0µ1 faulty | ||
| GRUNDIG |
CUC120
|
Frame distortion. | Ic tda1770 if used , d2761 ( ske4g1/04 ) , r2761 ( 6.8Ω , .75w ) | ||
| GRUNDIG |
CUC120
|
Frame collapse - sound ok. | D2764 ( ske2f1 ) o/c. | ||
| GRUNDIG |
CUC120
|
Field faults | C2768 d2761 r2761 6r8 presets or tda1770 | ||
| GRUNDIG |
CUC120
|
Dead. | C633 ( 100u f ) s/c. | ||
| GRUNDIG |
CUC120
|
Dead - bu208 s/c. | Check for c633 ( 100uf ) s/c , r646 , replace c631. |