Grundig Repair Tips
Search: Grundig
Results: 948
Results: 948
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| GRUNDIG |
CUC2401
|
Int field collapse | D2758 int oc | ||
| GRUNDIG |
CUC2401
|
Int dead | Ht pot r367 1k | ||
| GRUNDIG |
CUC2401
|
Goin into standby after few mins. | Loptx ( if comes on agn from cold ) freezer dont work! | ||
| GRUNDIG |
CUC2401
|
Dead. | D666 s/c. | ||
| GRUNDIG |
CUC2401
|
Dead with silent tripping | D666 in snubber network s/c | ||
| GRUNDIG |
CUC2401
|
Dead psu tries but fails to start | C633 100µ 25v o/c | ||
| GRUNDIG |
CUC2401
|
Dead ht ok at psu o/p | No ht at loptx - pri winding o/c | ||
| GRUNDIG |
CUC2401
|
Dead - faint tripping heard | Dry joints loptx | ||
| GRUNDIG |
CUC2401
|
Dead | R637 1k ht preset hi res | ||
| GRUNDIG |
CUC2401
|
Bu508 getting too hot. | Change tda8140. | ||
| GRUNDIG |
CUC2400
|
Tuning - will not tune in. | 5v rail down to 4v , ic676 ( mc78mq5ct ) | ||
| GRUNDIG |
CUC2400
|
Sync - intermittent frame sync or bounce. | Mod available. | ||
| GRUNDIG |
CUC2400
|
St/by only | 4m7 resistor in psu connecting the 2 earth rails o/c | ||
| GRUNDIG |
CUC2400
|
No blue | R760 15k on crt base o/c | ||
| GRUNDIG |
CUC2400
|
No blue | R769 on tube base oc | ||
| GRUNDIG |
CUC2400
|
Low sound | Tuner faulty | ||
| GRUNDIG |
CUC2400
|
Flashing & intermittent picture. | Poor contact on crt base board , & cap shorting. | ||
| GRUNDIG |
CUC2400
|
Dead. | Bu508d. | ||
| GRUNDIG |
CUC2201
|
Tripping, thumping noise & no display | Combi tfmr o/c sec windings n & l | ||
| GRUNDIG |
CUC2201
|
Tripping - then comes on. | Set ht control r637 ( 1k ) |