Daewoo Repair Tips
Search: daewoo
Results: 145
Results: 145
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
DAEWOO |
CP240 GB20F8T2
|
No control of vol or chan change - neg pic with fb lines | 1703 eprom available from seme part number cat24c08p at £8 | ||
DAEWOO |
CP240 GB20F8T2
|
Dead or relay clicking only | C840 47µ 25v in psu pri | ||
DAEWOO |
COMBI
|
Child lock removal | Press bule-yellow-green-red within 5-10 secs then press st/by twice | ||
DAEWOO |
2898ST
|
No txt | Reprog eeprom using service remote | ||
DAEWOO |
1427X -CMC1502B
|
Lack of width | R526 open | ||
DAEWOO |
1427X -CMC1502B
|
Lack of width | R526 open | ||
DAEWOO |
CMC1427X1
|
Unfocused | Flyback (adapted a focus kit) | ||
DAEWOO |
14A5
CP 375 |
Doesn't start | Falls into protection | Altered r 804 = 0.56r | |
DAEWOO |
CMC1427S
|
Does not turn on. LED blinking. | Ic802(cva2415t) on crt base pcb. | ||
DAEWOO |
CMC1427S
|
Excess shine. | R112 10r. | ||
DAEWOO |
CMC1427
|
The thd200f horizontal output burned out and I can't find another... I've already tried bu2508...2520...they all heat up and burn... | Bu 4522 ,bu 2520af, buh 715, 2sc4542 | ||
DAEWOO |
CMC1424X
|
Dead | Replaced ic001 strs6707. | ||
DAEWOO |
CMC1424S/1425S CMC 1424S/1425S
|
No synchronizing on lines. | Check of ic301, ic501, c505-c508, v501, r508-r510. | ||
DAEWOO |
CMC1424S/1425S
|
No brightness adjustment. | R201, d201, c201, vr201, r203 e r206. | ||
DAEWOO |
CMC1424S/1425S
|
Blown fuse. | D001, c001, dp001, rp001 e ic001. | ||
DAEWOO |
CMC1424S/1425S
|
Not work a regulation of bright. | Check of r201, d201, c201, vr201, r203, r216. | ||
DAEWOO |
CMC1424S/1425S
|
The pictures is removable in vertical. | Check of q404, q405, vr402. | ||
DAEWOO |
CMC1424S/1425S
|
The pictures in up and bottom is bad. | Check of c406, c407, c409. | ||
DAEWOO |
CMC1424S/1425S
|
The size on height is not in rate. | Check of c515, c517, c313, c317, c421, q401, q411, q412. | ||
DAEWOO |
CMC1424S/1425S
|
Vertical line. | Check of c317, c421. |