Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
MITSUBISHI |
TC - 2090
|
Locked channel does not change channels or tune | The defect was the 10k ceramic capacitor c-716. | ||
MITSUBISHI |
TC-2899A
|
Goes out after 5 to 10 minutes of operation. | C-226 of 10k | ||
MITSUBISHI |
TC-1430A
|
Vertically rolled up and down | C-517 of 470µfx16volts open. and open shock l-605. | ||
MITSUBISHI |
TC-20T51
|
Tuning does not work | Q-206 shorted | ||
MITSUBISHI |
TC-14T51
|
Only get channel 2 | Ic-1002 24c02 memory | ||
MITSUBISHI |
TC-2041S
|
Sometimes it doesn't turn on | R916 (150k) | ||
MITSUBISHI |
TC-2020
|
Low channels disappearing. | C7t1 (0,01 µf) | ||
MITSUBISHI |
TC-2001Z
|
S/horizontal synchronism. | R510 (6.8hp) | ||
MITSUBISHI |
TC-20012
|
Remote control does not work. | C7p1 (0,022 µf) | ||
MITSUBISHI |
TC-2001
|
Inoperative, the red light on the on/off switch only lights up | C-7p7 leaky or shorted at the power supply. | ||
MITSUBISHI |
TC-2098/2099
|
Retraces at the top of the screen. | Solution to the defect is in the vertical, change the capacitor c-459 of 100ufx35v defect: vertical closed: replace r459 of 82kΩ, see other vertical electrolytics. | ||
MITSUBISHI |
MITSUBISHI AS QUE USAM O STRS-67XXX NA FONTE.
|
Burning 120v zener | Open power supply 4.7uf electrolytic capacitor, worn out. | ||
MITSUBISHI |
TC-2041S
|
He has difficulty calling, sometimes he calls, sometimes he doesn't. | R-916 (150k) open. change it, it may be open or changed. | ||
MITSUBISHI |
ALGUNS MODELOS
|
Function lock | : in standby activates ch + - when turned on then activates menu to/unlock | ||
MITSUBISHI |
TC-1470 DD
|
Off, indicator LED does not light up. | Q-401 (bf-485) leaking. | ||
MITSUBISHI |
TC - 2030
|
Rumbling sound, weak image and disappears after a few moments with vertical shrinkage. | Q-552 leaking. . | ||
MITSUBISHI |
TC - 2090
|
Locked channel does not change channels or tune. | 10k ceramic capacitor c-716 | ||
MITSUBISHI |
TC 2030
|
Becomes negative after some time | The 10k x 50volt ceramic capacitor c107 (.01µf) was replaced. | ||
MITSUBISHI |
TC-1631
|
Call whenever you want. | Change resistance r-916 or r-915 = 150 kΩ open. | ||
MITSUBISHI |
TC2054
|
Roasted r555 excess high voltage sometimes cuts the neck of the kinescope | Mau contacto na solder do resistor 7a5 6k8 x 3w (solder) |