Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI |
TC-2001Z
|
Closed vertical: | C410 | ||
| MITSUBISHI |
TC-2001Z
|
Fuse blowing: | D901, d904 | ||
| MITSUBISHI |
TC 2041
|
Channels go out of tune, do not memorize characters | D 771 shorted, r 771 open, there is no 30v. | ||
| MITSUBISHI |
2090
|
Horizontal does not oscillate. | Check tf 502, cold welding | ||
| MITSUBISHI |
TC 2001
|
TV stays on standby, but doesn't turn on. | Possible cause c 7p5 | ||
| MITSUBISHI |
TC 29FS
|
Retrace lines at the top of the tube. | C969 (power supply) | ||
| MITSUBISHI |
TC 1492
|
Vertical closed | C453 which was out of stock | ||
| MITSUBISHI |
MOD TC 2097/98
|
Dead | R 904. | ||
| MITSUBISHI |
TC 2099 - 1499 - TC 20A
|
TV wouldn't turn on, standby keeps blinking. | C 907 | ||
| MITSUBISHI |
TC 2020
|
Lack of color | C 603 | ||
| MITSUBISHI |
TC 1409
|
The TV worked with a reduced frame and heated up to 557°C. | R 558 open | ||
| MITSUBISHI |
TC 3003
|
Featured a block of four thin white horizontal lines, which ran vertically at frequency. network and constantly disarmed at random. | |||
| MITSUBISHI |
TC2090
|
Device inoperative, zener diode d-906-120v shorted, before replacing the zener, resolder or change the 100ufx160v capacitor that is in parallel with the zener, as it is the main culprit of the zener shorting out. | |||
| MITSUBISHI |
TC 2090
|
No audio. | Changed the audio coil, everything ok. | ||
| MITSUBISHI |
TC 206B
|
Screen not wide enough | Wide capacitor (555/556) 5600pf and 5.1nf. | ||
| MITSUBISHI |
TC2098
|
Poor width, with cracking in the tube | C555, c556 with escape. | ||
| MITSUBISHI |
TC 2041S
|
Sometimes it doesn't turn on | R916 (150k) | ||
| MITSUBISHI |
TC 2020
|
Horizontal output transistor burning | R551 (10 k) | ||
| MITSUBISHI |
TC 2020
|
Low channels disappearing | C7t1 (0,01 µf) | ||
| MITSUBISHI |
TC2001Z
|
Without horizontal synchronism | R510 (6.8hp) |