Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI |
TC-2098
|
Tip | To quickly conclude if the defect is in the power supply or in the rest of the television, use external 115v/12v/45v power supplys, without using the television's power cable, place the power supplys on the diodes' cathodes: d950/d951/d952, if everything works just go back to the power supply and fix it. | ||
| MITSUBISHI |
TC2020
|
Doesn't work | Measuring pin 12 of ic401 (ha11414) it works again but when removing the test lead it goes off again. I replaced the integrated one and the problem is solved. | ||
| MITSUBISHI |
TC 2999
|
Lack of vertical scanning | Resistor r 569 (1,5Ω ) aberto | ||
| MITSUBISHI |
TC 2121 FS
|
Humming at the power supply, resistor r 555 burnt | Capacitors c 457 (100u f x 35v) and c 458 (470 u f x 35 v) with loss of capacitance or high esr. | ||
| MITSUBISHI |
TC 2099
|
Red screen with locked functions | Faulty memory cl | ||
| MITSUBISHI |
TC 2099
|
Dead, no audio. standby LED flashing continuously | Cold solders on the terminals of the horizontal driver transformer | ||
| MITSUBISHI |
TC 2099
|
Inoperative, stand-by LED lights up and then goes out | "high" power supply, faulty IC 951 regulator integrated circuit | ||
| MITSUBISHI |
TC 2099
|
Inoperative, stand-by LED flashes continuously quickly | Capacitor c 907 (22 uf x 100v) with loss of capacitance or high esr | Optical coupler pc 901 ( tlp -.1 | |
| MITSUBISHI |
TC 2099
|
Inoperative, LED turns on and off | Zener diode d 907 (8eb2) leaking or shorted | Resistor r 459 (82 k) open | |
| MITSUBISHI |
TC 2099
|
Inoperative, LED turns on and off | Optical coupler pc 901 ( tlp -.1 | ||
| MITSUBISHI |
TC 2099
|
Lack of vertical scanning | Resistor r 459 (82 k) open | ||
| MITSUBISHI |
TC 2099
|
Diagonal stripes across the screen | Replace all 1 u f capacitors close to the microcontroller | ||
| MITSUBISHI |
TC 2098
|
High-frequency noise | Capacitor c 596 (10 uf x 160v) with loss of capacitance or high esr | ||
| MITSUBISHI |
TC 2098
|
Power supply transistor c 3852 overheating | Capacitor c 906 (47 u f x 50v) with loss of capacitance or high esr | ||
| MITSUBISHI |
TC 2098
|
No plot, no mat | Solda fria no pino 1 do fly - back | ||
| MITSUBISHI |
TC 2098
|
Frame closed on all four sides, normal image and audio | Capacitors c 555 and/or 556 (4 n 7 x 1.6 kv) open or with cold solders | ||
| MITSUBISHI |
TC 2098
|
Does not work, panel LED is on | Transistor 2sd1877) in collector - emitter short due to loss of capacitance (4n7 x 1600 v) | ||
| MITSUBISHI |
TC 2098
|
Return lines at the top of the screen (retrace) | Capacitance c 459 (100 u f x 35v) with loss of capacitance or high esr | ||
| MITSUBISHI |
TC 2098
|
Turns on with blue screen and the indication "functions lock" | Press the channel + key for about 5 seconds until it unlocks or access the "lock" menu | ||
| MITSUBISHI |
TC 2098
|
When turned on, the screen appears blue, when pressing "power" it works normally, but when turned on again, the blue screen returns | Resistor r911 (1 k2) with changed resistance |